1 / 4
AirPetz : Apple Airtag case for pet cat & dog — zdjęcie 1
1 / 4

AirPetz : Apple Airtag case for pet cat & dog

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Apple Airtag case for pets Easy assembly; Pop it in, Twist, and Slide No stitching and glueing required

Ocena
5 / 5
Polubienia
45
Pobrania
303
Wydruki
1
Wyświetlenia
908
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Pets
Licencja
Creative Commons — Attribution — Share Alike

Use Case:

  • Works for strap buckles about 14.20mm wide or less
  • There is another version in case you need a wider opening for strap buckles:
    AirPetz Chonky:

 

Printing Tips:

  • Recommended material: PETG, PLA
  • Recommended infill: Gyroid at 40%
  • No supports and brims needed
  • Works perfectly for printers with 0.10mm tolerance (0.20mm is acceptable)
  • Print Bed Orientation: as shown below…

 

How to Assemble:

  • Casing assembly
  • Pet collar assembly

How to Disassemble:

  • Compress with both palms
  • Twist counter-clockwise for about 30 degrees (or until it can't turn)
  • Release the top cap

 

 

Thank You!

If you like what I do and want to support my ideas and projects, it means a lot. Your support helps me refill that featured cup here—no pressure, just gratitude. Thanks for being here.

https://buymeacoffee.com/kraavs

https://coff.ee/kraavs

Tagi