1 / 4
AirPetz : Apple Airtag case for pet cat & dog
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Apple Airtag case for pets Easy assembly; Pop it in, Twist, and Slide No stitching and glueing required
- Rating
- 5 / 5
- Likes
- 45
- Downloads
- 303
- Makes
- 1
- Views
- 908
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Pets
- License
- Creative Commons — Attribution — Share Alike
Use Case:
- Works for strap buckles about 14.20mm wide or less

- There is another version in case you need a wider opening for strap buckles:
AirPetz Chonky:

Printing Tips:
- Recommended material: PETG, PLA
- Recommended infill: Gyroid at 40%
- No supports and brims needed
- Works perfectly for printers with 0.10mm tolerance (0.20mm is acceptable)
- Print Bed Orientation: as shown below…

How to Assemble:
- Casing assembly

- Pet collar assembly

How to Disassemble:
- Compress with both palms
- Twist counter-clockwise for about 30 degrees (or until it can't turn)
- Release the top cap

Thank You!

If you like what I do and want to support my ideas and projects, it means a lot. Your support helps me refill that featured cup here—no pressure, just gratitude. Thanks for being here.
https://buymeacoffee.com/kraavs
