Gpu Bracket remixed for O11D vision compact.
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
changed the design to fit the updated O11D vision compact case from lian li
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 25
- Wydruki
- 0
- Wyświetlenia
- 474
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
recently replaced an aging Lian li O11 dynamic and the kit i had didn't fit in the new case.
i found this amazing model by Pixelglance3d
https://www.printables.com/model/77723-watercooled-gpu-vertical-bracket
but when i went to print it, i had to take a dremel to adjust a bunch details that do not exist on the new O11. i also added a bracket so that my 3090 would stop sagging. once i got my fitment correct it was time to modify the original design.
https://lian-li.com/product/o11-vision-compact/
please print in ASA or ABS, something with a higher thermal limit.
i believe he said this already but this was designed for a single slot watercooled card.
we both have 3090's
Hardware needed:
Pcie extension cable (mine is from this kit. https://lian-li.com/product/o11d-1-vertical-gpu-bracket-kit-pci-e-4-0/
3mm bolts and screws to mount the pcie cable.