Trident Skirt with Slot for 20mm x 13mm Power Switch (300mm)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Adds an additional (more convenient) power switch the left front of a 300mm Voron Trident.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 11
- Wydruki
- 0
- Wyświetlenia
- 66
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- GNU General Public License v3.0
The power switch is normally in the back with the power inlet and fuse, but I like having an illuminated power switch near the front for convenience, and this 20x13 mm switch was what I had laying around. I wire them in series so both the back switch and this side switch need to be on for the printer to work.
However I hear some people like to keep the pi/5V running and disable the 24V to save power, you could use it for that, too - or anything else that needs a switch.
This is for the left side, just mirror the part in the slicer to print one for the right side. Autodesk Fusion model included.