1 / 1
Trident Skirt with Slot for 20mm x 13mm Power Switch (300mm) — image 1

Trident Skirt with Slot for 20mm x 13mm Power Switch (300mm)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Adds an additional (more convenient) power switch the left front of a 300mm Voron Trident.

Rating
0 / 5
Likes
1
Downloads
11
Makes
0
Views
66
Reviews
0

Updated at source:

Model information

License
GNU General Public License v3.0

The power switch is normally in the back with the power inlet and fuse, but I like having an illuminated power switch near the front for convenience, and this 20x13 mm switch was what I had laying around.  I wire them in series so both the back switch and this side switch need to be on for the printer to work.

However I hear some people like to keep the pi/5V running and disable the 24V to save power, you could use it for that, too - or anything else that needs a switch.

This is for the left side, just mirror the part in the slicer to print one for the right side.  Autodesk Fusion model included.

Tags