1 / 11
Philips Hairclipper QC5050, QC5010 Head Repair — zdjęcie 1
1 / 11

Philips Hairclipper QC5050, QC5010 Head Repair

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Replacement for Philips QC5050/QC5010 hair clipper's head part. Restores cutting performance and fit. Easy to install.

Ocena
0 / 5
Polubienia
5
Pobrania
12
Wydruki
0
Wyświetlenia
214
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Bathroom
Licencja
Creative Commons — Attribution

Print Settings

Rafts: Doesn't Matter

Supports: Yes

Repair Instructions for Philips Hair Clipper Head (QC5050/QC5010):

  1. Disassemble the head and remove the broken plastic part. (Mine broke where the arrow indicates—poor design choice!)
  2. Slightly bend each end of the spring and insert them into the designated holes.
  3. Insert the printed replacement part into the square slots. PLA works fine, but nylon is even better. You may need to use a small file for a perfect fit.
  4. Use a heated iron to melt and secure the outer tips of the two extruded rectangles to lock the part in place.
  5. Reattach the razor and insert the spring ends into the holes on the razor.
  6. Reassemble the head back into the shaver.
  7. If the clipper sounds noisy, slightly reduce the size of the cylinder’s movement hole and reprint. If the motor struggles to start, widen the slot slightly using a needle file.
    For smoother movement, brush the slot with dichloromethane (for PLA) or formic acid (for nylon).

     

Tagi