Round Nut for IKEA Besta Leg (STUBBARP)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A modular 3D printable round nut designed for IKEA Besta STUBBARP legs. Stack multiple pieces to reach the correct depth
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 10
- Wydruki
- 0
- Wyświetlenia
- 118
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution — Share Alike
Lost or damaged the round nut inside the STUBBARP legs of your IKEA Besta unit? This 3D model allows you to easily print a compatible replacement that fits into the wooden leg and secures it to the furniture frame.
The nut is designed to perfectly fit the cylindrical cavity inside the STUBBARP leg, replicating the dimensions and shape of the original IKEA part. It's a great solution for reusing the legs or repairing your furniture without having to buy new components.
Features:
- Compatible with IKEA Besta STUBBARP legs
- Modular design: stack multiple nuts to reach the required length
- Easy to print (no supports needed)
- Tested for use with the original screw
- Comes in ready-to-print STL format
Important Note:
As shown in the photos, you’ll need to print multiple nuts to match the required depth. In my case, 5 nuts were enough to fill the leg cavity and provide a secure fit.
Print Settings:
- Recommended material: PETG or high-strength PLA
- Layer height: 0.2 mm
- Infill: 50% or more for added strength
- No supports needed
- Suggested orientation: flat side down