Air65 C03 camera adapter for Mobula6 / Mobula7 canopy
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
a little adapter that allows to mount the BetaFPV Air65 camera to the Mobula6/7 canopy
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 154
- Wydruki
- 0
- Wyświetlenia
- 1181
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Public Domain
Frustrated with the fragile and difficult-to-source stock canopy for the BetaFPV Air65? The original canopy, while lightweight, breaks easily and offers limited, cumbersome camera adjustment.
This design allows you to upgrade to a more robust HappyModel Mobula6 canopy, which offers significantly better protection for internal components.
Since the Mobula6 canopy isn't directly compatible with the Air65's C03 camera, I've created a simple two-part adapter. This adapter clamps securely around the camera lens using an O-ring.
Please note:
- You will need to carefully widen the camera slot on the Mobula6 canopy (e.g., with a utility knife) to fit the C03 camera.
- A small hole will also need to be made at the rear of the Mobula6 canopy for the antenna pass-through.
This mount has worked perfectly for my setup. I'm providing both the STL file for direct printing and the FreeCAD source file, allowing you to make adjustments or adapt the design for similar canopies with different dimensions.