LILYGO T-Embed Case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
TPU case for the LilyGO T Embed / T Embed CC1101
- Ocena
- 0 / 5
- Polubienia
- 27
- Pobrania
- 444
- Wydruki
- 0
- Wyświetlenia
- 3037
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Portable Devices
- Licencja
- Creative Commons — Public Domain
TPU case for the LilyGO T Embed & T Embed CC1101 since I couldn't find one!
I suggest using TPU 95A or softer for the case if you have antennas/SMA connectors, since they do take some effort to put on. Otherwise, there shouldn't be too much problem with putting it on.
I have included as many variations as possible to fit everyone's needs, and you can cut out 9.4mm ⌀ holes with Tinkercad or something else if you have antennas with SMA connectors.
Dry your filament, print with tree supports, and slow it down for the best results!
The button is for the clicky one at the top, print it in PLA and press it into the hole and it shouldn't fall out. There is an integrated version included as well, but be warned it might not be as clicky as the other one.
This model is based off the 3D files provided by LilyGO, props to them for open sourcing this design. You can find it here: https://github.com/Xinyuan-LilyGO/T-Embed-CC1101/tree/master/3D_files
Please let me know if there are any questions or issues with the model
STEP & Fusion files are included if you want to make any modifications, enjoy!