Roborock LEGO (bearing mounted) front wheel
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Silent and cheap replacement of the front wheel of the Roborock vacuum robots.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 3
- Wydruki
- 0
- Wyświetlenia
- 177
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Easy to print spacers for a cheap replacement of the front wheel of a vacuum cleaner robot. What you need are two 694ZZ bearings (4x11x4mm) you can pick up at your favorite Chinese webshop ;-), one LEGO tyre with OEM number 56890, the original nose wheel pin/axle/shaft and these printed spacers. This in total will cost you just a few bucks.
Real smooth and silent movement!
This modification is based on a front wheel of a Q7 Max, I don't know if all the wheels of roborock are the same. This mod will work if the axle of the front wheel is 30mm long and 4mm in diameter.