LabStack Orange Pi Zero 3 module
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A LabStack rack mount module for the Orange Pi Zero 3.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 26
- Wydruki
- 1
- Wyświetlenia
- 212
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution
This is a fairly polished “draft” module for LabStack rack mounts.
For mounting the Orange Pi onto the module, I was generous with the mount holes so you can use whatever hardware or fasteners you have laying around. I used the screws and nuts from an existing heatsink I had mounted, which you can see in pictures one and two.
Since the peripherals don't have any overhang it's a bit difficult to get it pushed further forward on the mount. However, the is clearance for all cables i've tested (usb-c & usb-a).
LabStack instruction + rack mount hardware:
- LabStack: https://github.com/JaredC01/LabStack
- Upstream PR: https://github.com/JaredC01/LabStack/pull/53
In a future update I may adjust for heat set threaded inserts, and give a bit more room for the peripherals. Feel free to comment if you need any updates.