Ratchet Strap Corner Guard
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A set of corner guards in 4 standard sizes to protect boxes or furniture from any ratchet straps holding them down.
- Ocena
- 5 / 5
- Polubienia
- 579
- Pobrania
- 915
- Wydruki
- 3
- Wyświetlenia
- 3944
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Garage
- Licencja
- Creative Commons — Attribution — Noncommercial
What is it?
This is a model I designed to protect the edges of boxes or other things you may be hauling from being rubbed down by ratchet straps.
How to use it
There is a 1, 2, 3, and 4 inch version. Each for the respective strap size.
most straps are 1 or 2 inches; the 3 and 4 inch versions are for very heavy duty straps.
Print intstructions
I would highly recommend printing these in PETG as they will last a lot longer than PLA when used outside.
I would also recommend printing these with at least 3 perimeters and a decently high infill.