Honda Grom Mirror Hole Screw Plug
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple screw meant to plug/fill the hole left after removing the stock mirrors on a Honda Grom
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 60
- Wydruki
- 0
- Wyświetlenia
- 173
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Share Alike
A simple screw meant to plug/fill the hole left after removing the stock mirrors on a Honda Grom. Tested on a 2020/Gen 2 Grom, this works for both the left and right side.
The knurling isn't very aggressive, but it should be enough to grip and remove the screw later if needed. For anyone that wants to make their own version, the thread spec is M10x1.25.
Print Settings
Filament: I printed mine out of PETG as I don't expect this to get so much sun, heat, or rain exposure to cause them to deteriorate and become a problem.
Infill: This shouldn't experience any real stress (unless you over tighten it) so I went with a 15% infill.
Layer Height: To make sure the threads print cleanly (and are usable) you should print with fine layer heights. I went with .12mm layers, but you know your printer better than I do, so feel free to print with what you know works.