Cupholder for Renault R5 e-tech two piece design
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
My first selfmade design for printables. A cupholder for my bottle in my R5. Inner diameter is 78mm. Depth is 115mm.
- Ocena
- 5 / 5
- Polubienia
- 22
- Pobrania
- 370
- Wydruki
- 3
- Wyświetlenia
- 1825
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Design is a cupholder for my R5 e-etech. I made it in two pieces to try different holders or make another cupholder. Its inner diameter is 78mm and its depth is 115mm. I also printed a logo on it, but its position might be not the best.
I printed it with yellow PETG in my Prusa XL. I created the code with easy print with my IPad. The cupholder needs no supports.
One piece design will follow.
Leave in the comments diameter and depth and/or wish another place for the Logo and/or with name and i will upload the model.