Liczymy pasujące modele…
No Supports Required Print Time: Approx 10 Min Printer Used: Ender 3 v2 with a 0.6 mm Nozzle Printer Settings 0.3 mm Layer Hight 2 Walls Speed 80 mm/s
Wydruk około 0,12 €–0,14 € nettoWstępna wycena jednego wariantu
Stand for Edifier MR5 speakers. The 3mf file has been splitted to fit on standard build plate sizes. Front is lifted 4cm, resulting in an angle of 8.3°, ideal for me. If you need different angles, you can modify the f3d file.
Parcel Shelf Pin for Mini Cooper R56 This bolt/pin is designed to securely hold the rear parcel shelf in place in your Mini Cooper R56 (2006–2013). It ensures stability and proper fitment of the shelf, helping maintain the vehicle's…
A small cover plate for the fractal design define R5 case. To prevent for instance cats to step on the power button.
It 's attached to the bottom with 4 fan screws. Perfect fits, if you want to set your 280 AIO to the front panel.
Used this stand for my sim racing setup as the speakers sit on the floor. This base allows the speaker to face up towards the driving seat, making for much better audible difference in sound delivery, compared to the speaker just sitting…
These are stands and tools to work on your aprilia SR50 fuel pumps! The round part with the square hole can be used to lightly tap down on the fuel pump cover to help work in some silicone lubricant for removal. The stands just help you…
These are the brackets I designed for my SO3 XXL and Uxcell R55 drag chain brackets. My HDZ is the first gen version, so the bracket for that one will have to be redesigned. I don't have the newest version, so you'll have to do it. There…
This bracket allows you to connect a Sonos Beam (Gen 2) on the Sonos Beam Wall Mount to a Peerless SR575M TV Cart. You'll need some M8 screws and M8 T-Slot Spring-Loaded Nuts for attaching it to the Peerless cart. I had some spare M8…
A hook to store an extension cord as you move around a Peerless AV SR575M TV Cart. You'll need some M8 screws and M8 T-Slot Spring-Loaded Nuts for attaching it to the Peerless cart. I had some spare M8 screws from an old TV mount and then…
BRANCA R59 replaces the plastic body and idler arm of the SainSmart / Creality Ender 3 Pro single-gear extruder with four printed parts. It keeps your original motor, brass drive gear, 624U grooved idler, spring and screws. The only…
Those bipod sled feet are designed for a chinese clone of Accu-Tac SR5 QD bipod. After printing, you need to tap the screw hole with M5-sized tap. Model made with Blender (with CAD Sketcher addon)
Designed to fit the Army Armament R504, but probably fits other HiCapas as well, as long as they have a threaded hole on the mag release. You will only need a small screw to fit the hole. Included are 3 STLs, a plain one, one with…
Introducing the Fractal Define R5 HDD Tray, designed specifically for the Fractal Design R5 case. This model combines multiple designs to ensure a perfect fit, allowing users to utilize rubber mounting hardware for optimal vibration…
Fits common P-Mag AR / 5.56 / .223 magazines and who knows what else. These can attach to a belt, screw to a wall or cabinet, belt attachments, paddles and misc. My modern P-mag's fit “just right” and the last 5mm insert locks them in. My…
When installed on this adapter, the base will be angled at 7 degrees from the cockpit mounting plate. To lock the base in front, you will need M6x18 screws (I had them with washers), and M6x10 screws for the back (included with the base).…
Wall mount for a Beelink SER5. The Beelink has long standoffs on the bottom, so the mount will only attach one way. I printed this with 70% infill, PLA+ and it clicks in place quite comfortably. Depending on what material you print with,…
The original clips on the window regulator cables broke when I was trying to replace the regulator in my Mini Cooper R52. The aftermarket regulator came with clips that clearly did not fit, so I modeled the original clip to print myself.…
When replacing a bulb in the headlight of my MINI, part of the headlight cover broke. So I created a model to print as a replacement part. I printed mine from PETG and it works great. The seal fits perfectly into the part. Material:…
A small quick model to hold a whoop quadcopter and run a vent on it so it does not overheat.
Description These are test pieces used for verifying if the DDR5 RAM coolers here will fit your motherboard before you pay any money for them. It is intended that you print the corresponding test piece you want to try and then attempt to…
This is a licence plate holder for KR51. The shape of the hull is adapted, the distance between the mounting holes is smaller then from the technical drawing (german licence plate) due to outward moving of the screws. I'd appreciate some…
In the 50's the Deutsche Bundesbahn started opperating the ETA150 battery powered railcars. https://nl.wikipedia.org/wiki/Baureihe_515 My goal is to my design 3D-print models of typical Dutch rolling stock. This German railcar does…
If you want a big screen i have made this tablet holder. fits 11" ipad pro, but can be made to fit others.
Simple Spacer for the NRG Style QR50 used at Simagic, Moza or VRS. Additional i added a cable clamp for an coiled cable Simply add the Spacer between the QR and your Wheel, to compensate for different heights of different steering wheels,…
About Storage tube for 16 MR52ZZ bearings (5mm outer diameter, 2mm inner diameter, 2.5mm height), the tiny bearing in the K1C extruder. It's a bit of a chonker, should help to actually find them back. Print instructions 2 walls and 15%…
This is a 3D printed case (two parts: body + lid) designed for a DIY motion sensor based on ESPHome and Home Assistant. Features: 3D printed enclosure with body and removable lid Powered via USB-C (no batteries required) Direct…
Mounting plate for the Moza R5 wheelbase Inclination angle: approx. 6° What you’ll need: - 2 × M6 6×40 screws (for attaching the wheelbase to the plate) - 2 × M6 6×30 screws (for attaching the wheelbase to the plate) - Any suitable M6…
Compatible Products: MOZA R5 Wheelbase MOZA R9 Wheelbase MOZA R12 Wheelbase Required Hardware (Not Included): 4× M5 nuts 4× M5×40mm bolts 2× M3×25mm bolts 1× 120mm cooling fan (120mm×120mm×25mm) Installation Instructions: Step 1: Remove…
I changed the model to fit a Dragonburner upgrade on my ender5 plus carriage mount. V3 added strength and 2 additional bolts , just need to drill stock carriage plate to accept 2 exsta bolts. Its printed with 0.2mm height, 4 mm width and…
This enclosure is engineered for a precision fit around the standard HC-SR501 sensor module. Design & Material: The case features a minimalist cubic design, likely printed in PLA or PETG. The bright yellow color makes it highly visible…
I poorly modified a friend's mount made for another quad to fit my Seeker5. Not made to work with stock XT60 setup.
I'm modifying my Ender5 plus with the MercuryOne mod and I've decided to replace the original Creality switch feet with a backlit circular one. ~Printed on a Centaury Carbon with SUNLU PLA+.
Plinth for KEF R500 speaker. I have not tested it. Three versions uploaded. All have 133.35mm between the screw holes. Each version has a different speaker width which is notated in the file name. It has to support a lot of weight so…
Mount for RAM in Lian Li 216 Case (40 mm fan only)
DDR5 Storage Box / Tray with QTY 16 and 32 variants. Optional lid for safekeeping. Designed for RDIMMs, but should work with UDIMMs as well.
The wall mount for the Umarex HDR50, HDR68 and HDS68 allows for easy, quick, and flexible attachment on the Ikea Skadis pegboard. Since the pegboard is available in several sizes, you can also purchase one that fits, for example, a…
WARNING: Not yet tested on a live server for fitment. If you’re able to test it before I do, please let me know in the comments. Replacement bracket for external ethernet / sdcard Dell module (CN-0x99HC) used in Dell PowerEdge R430/R630…
This is an engine cover name plate for the R53 Print in ASA, PETG CF, ABS, or Nylon 20% infill Your printer can help with color changes
This model does fit the common 256x256mm printers if the track is rotated by 22.5 degrees. You can also make s curves with two of the same half tracks Also check out these other free printable files: my monorail designs (motors, tracks,…
I wanted a thing to fit some extra drives in my R5 case so i modified the model for the 7XL to fit some extra drives. Depending on if you are using the fan on the side panel of the case you may need to rotate your drives, I had to place…
Lego_R56_XL_track 45gr for the Core one L made the orginal file dubbel big so an xl version for core one L users For fast setting up rails, extra smooth rides and fast cleaning up. and to use my Core one L , what it was made for, making…
J'ai dessiné ce support pour le HDR50 qui possède le support double barilllet. Imprimé en PETG. Il est possible de le fixer contre un mur, une porte ou un meuble avec l'aide de deux vis.
Stand for Edifier MR5 speakers. The 3mf file has been splitted to fit on standard build plate sizes. Front is lifted 4cm, resulting in an angle of 8.3°, ideal for me. If you need different angles, you can modify the f3d file.
Support adapter à mon besoin , réutilisation de la pièces cylindrique supportant la bobine Matériel: pla ou petg Hauteur des couche 0.2 nombres de parois 3 Remplissage 15% à 20% Bonne impression
I made this mount to hold a tablet to use as gauges on my sin rig. This fits Moza R5, but I believe it will fit other Moza wheel bases as well. There is a relief built in to use Velcro.
The canon R50 is very small and great travel camera. Unfortunately my palm keeps triggering the Drive Mode button and I've missed many shots. This is simply a small raised shield to give some protection and still allow easy access to…
This remix is for addressing the wobble and high center of gravity issues from the original design. Now this version clamps firmly to the plate and sit lower than the original design. This design needs 4 M3x5mm heat inserts.
Simson Schwalbe KR51 Kennzeichenhalter für ein Klebekennzeichen (Aufkleber) des Versicherungskennzeichens. Der Falz an der Karosse wurde ausgespart, sodass die Halterung einfach mit Schrauben und den originalen Löchern befestigt werden…
Upgraded from A7IV to A7RV and I dislike the mode change button that has a pin and needs to be pressed in order to change the PSAM modes. The button is already moving quite hard so there's no need to press the pin in the middle. Designed…
This is a printed replacement gear stick bracket for an R50/R52/R53 Mini Cooper (model year 2001 - 2006 ). This bracket is designed to attach both the gear stick boot (leather fabric) and silver trim piece to the center console. Printing…
OpenSCAD screwtop container customerizer generated storage container for MR52ZZ bearings. Printing material: PLA bottom / top layer: concentric infill: 15% OpenSCAD screwtop container customerizer settings The following settings were used…
This is a printed jig which is used to compress the clutch valve cylinder for bleeding found on an R53 Mini Cooper (model year 2001 - 2006 ). This is designed to be used with a pair of M8 nuts and threaded bolts greater than 90mm in…
This is a currently untested mod to change out the 5.5mm ball bearings in the dual toolhead sensors. I am currently in the testing phase and waiting for my MR52ZZ bearings to come in. Anyone else that would like to test this, use at your…
added a debossed mini logo and emblem. Can be painted in an AMS for a multi color print
SKELTER5 V2* Now available for purchase at cncdrones https://www.cncdrones.com/skelter5.html UPDATE* 3-21-24 I added new files with tighter tolerances. Changes made include reducing the clearance for the arms to prevent wiggle increased…
So if you preheat your Flair58 or any 58mm portafilter with this amazon Mecity kettle (or other variants with the same handle) then this may be useful to you. I use the kettle steam to preheat the portafilter and handle to help reduce…
I was unable to find a model of this specific design to match my existing slot covers. I previously downloaded a cover from this great collection https://www.printables.com/model/219169-pcipci-e-slot-covers-10-designs but realized the…
A simple replacement spacer to adjust the belt width in the Umarex HDR50 holster. Fits without glue in a loose friction fit and is high enough to jam against clip when closed. (See pictures) Printable in PLA with no problems. Settings I…
Lights mount for my GPS support. I have printed it in ABS. Any strong material should be ok, I suppouse it will be better in ASA.
Precise Slug for Umarex t4e HDR50 This is my design on slug that I have tried on my TR50. Remove support after print is finish like on images! Then simply place the 8mm ball on top and with a little pressure it will click into position.…
http://www.amazon.de/Foxnovo-3V-5V-10DOF-9-Achsen-Attitude-Indicator-L3G4200D/dp/B00PRFPYI6?ie=UTF8&psc=1&redirect=true&ref\_=oh\_aui\_search\_detailpage Category: Other
Printed with standard MK4 Input Shaper Structural Preset settings with Prusament PETG on a Powder coated Textured Plate. Designed for two 5 mm x 280 mm zip ties. This was intended for the Refresh 2005 and 2006 Mini R50 as well as the…
20-40% infill 0,2 layer with support. ~2hours to print. give a like and have fun to save money :)
My 2006 R50 Mini Cooper's battery plastic support failed. So I designed a part that fits on top of the metal support and pushes against the battery box. The Air box mount then fits on top of the 3d printed part and the Mini/BMW Bolt then…
Those bipod sled feet are designed for a chinese clone of Accu-Tac SR5 QD bipod. After printing, you need to tap the screw hole with M5-sized tap. Model made with Blender (with CAD Sketcher addon)
Storage box for 8 desktop RAM modules (DDR5, DDR4, DDR3) with lid. The lid can be easily lifted or placed on top – there is no locking mechanism. The model comes without any labeling. Labels can be added as needed using Bambu Studio. If…
Designed to fit the Army Armament R504, but probably fits other HiCapas as well, as long as they have a threaded hole on the mag release. You will only need a small screw to fit the hole. Included are 3 STLs, a plain one, one with…
Tried to Print in PETG and ASA. I could not get ASA to work without warping. My final product was printed in PETG with textured build plate. I'm still learning to print smooth with PETG so you might have success with that. Prusa Mk 4…
This was my first design for my R5. I went on to create one for R2 as most of my builder friends have made one. Uploading all of my designs for posterity.
This is a keychain I made to help support the sierra college car club at their cars and coffee, the version I made had the 115 racetag on it and some additional details, however I decided to strip those details and just upload a stock…
Introducing the Fractal Define R5 HDD Tray, designed specifically for the Fractal Design R5 case. This model combines multiple designs to ensure a perfect fit, allowing users to utilize rubber mounting hardware for optimal vibration…
Key holder for the MINI R55 R56 R57 R58 R59 R60 R61 Up to 5mm diameter for the screws.
Requires 4 M3 screws you would use for standoff studs, self tapping into the plastic posts.
I brought in the original STL (from Bingbingaling ) as a mesh and modeled the extension around that. Attaching the original model here for convenience. https://www.thingiverse.com/thing:658851 Light Switch Extender for Young Kids…
Sponge holder for MEX R5B sink (circular type) I use standard support. No ABS require, but I mainly print using ABS. For this, I use ABS and then do acetone bath on the sponge area to melt it a bit to make sure no water leak inside. You…
Introducing the Gridfinity 1x1 LR1133 Storage Bin, designed to hold 10 LR1133 batteries. As storage options for LR1133 batteries are limited, with most focusing on LR44 or LR1130, this compact 1x1 bin provides a tailored solution. Given…
Remix of the HC-SR501 with extension. I removed the back but included a slight gap in the back for cable to run through. Print Settings Printer: REPRAP Samuel Rafts: No Supports: Doesn't Matter Resolution: 0.2 Infill: 40% Category:…
Fits common P-Mag AR / 5.56 / .223 magazines and who knows what else. These can attach to a belt, screw to a wall or cabinet, belt attachments, paddles and misc. My modern P-mag's fit “just right” and the last 5mm insert locks them in. My…
Power switch cover I designed to prevent my cat from powering down my computer "accidentally" while I game instead of paying attention to him. I mounted this by using double sided 3M foam tape Print Settings Printer: Anet A8 Rafts: No…
The part this replaces is a nightmare to find and criminally expensive. So… I submit to you a cheap and easily produced screw retainer for your Mini R53 Door Panel. Cheers friends! Printing and First Use: Nozzle : 0.4 mm Layer Height :…
Haven’t found anyone who has uploaded a printable timing belt clip for the back of the AD5M toolhead, so I took a pair of calipers and loaded up Fusion360 and attempted to recreate the design of the original belt clips that came with the…
Print the main bracket strong. Other than that, have fun and choose a nice color!
For my purposes, having a big, red, easily-pressed shut-off-all-power button on the front of a rack mounted PDU wasn't helpful. I think the DLI EPCR5 probably came with some piece of plastic that blocked the button when it was new, but my…
Inner Lock trim for Toyota LiteAce/TownAce (SR40/SR50) I maded for missing part of my car. It fits 3 doors - Driver, Passenger and Both Sliding Doors (if U Have more than one ) May be need some cuts at lower part to free side locks. v1 is…
The R5 is just a rebranded r7 240. I printed this and it works fine, just remove the grounding tape from the top of the DP port to make it sit flush. I do not own an r7 but I don't see why it wouldn't fit Category: Computer
Enclosure for OHS Authentication Node, R503 Fingerprint Sensor, and RFID Reader This enclosure is designed to house all the components needed to arm and disarm your Open Home Security (OHS) alarm system using either a fingerprint or an…
Edit 06/07/25: Added smooth versions of the grip without the finger slots and uploaded the fusion360 files to make life easier for anyone that wants to remix, I didn't realize in all this time that I didn't upload it :( Post your make if…
A small tray for use with an LNR Precision MTR5b when used with the Ikea chopping board flight deck
When installed on this adapter, the base will be angled at 7 degrees from the cockpit mounting plate. To lock the base in front, you will need M6x18 screws (I had them with washers), and M6x10 screws for the back (included with the base).…
GoPro mount for Canon R5C smallrig cage to use GoPro as Gyro logger for stabilizing footage in software like Gyroflow. compatible cage: https://www.smallrig.com/smallrig-black-mamba-camera-cage-for-canon-eos-r5-c-3890.html Printed in PETG…
Template for radius R5 - R10, external and internal. Printed PETG or PLA with 15 % infill. Layer 0.15 mm. Includes a rim with engraved numbers for multi-color printing. A stand is also included.
