1 / 25
Uxcell R55 (25mm x 50mm) Drag Chain Brackets for SO3 — zdjęcie 1
1 / 25

Uxcell R55 (25mm x 50mm) Drag Chain Brackets for SO3

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

These are the brackets I designed for my SO3 XXL and Uxcell R55 drag chain brackets. My HDZ is the first gen version,…

Ocena
0 / 5
Polubienia
2
Pobrania
14
Wydruki
0
Wyświetlenia
259
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Other Ideas
Licencja
Creative Commons — Attribution

These are the brackets I designed for my SO3 XXL and Uxcell R55 drag chain brackets.

My HDZ is the first gen version, so the bracket for that one will have to be redesigned. I don't have the newest version, so you'll have to do it.

There is hardware that needs to be purchased. I picked it up from McMaster-Carr:

02 - 92510A661_ALUM UNTHRD SPACER

08 - 92095A225_18-8 SS BUTTON-HEAD SOCKET CAP SCREW

16 - 93475A240_TYPE 18-8 STAINLESS STEEL FLAT WASHER

08 - 93625A200_TYPE 18-8 STAINLESS STL NYLON-INSERT LOCKNUT

02 - 91525A321_TYPE 316 STAINLESS STEEL FLAT WASHER

05 - 92095A214_18-8 SS BUTTON-HEAD SOCKET CAP SCREW

34 - 92210A112_18-8 Stainless Steel Hex Drive Flat

You will need to drill and tap your aluminum extrusion to mount the brackets with the #4-40 screws. The 3D printed parts are designed to be tapped for #4-40 screws and use the 92210A112 screws.

I also designed some brackets for the smaller drag chain that came with my first SO3, and those will be linked shortly.

Print Settings

Printer Brand:

Prusa

Printer:

i3 MK3

Rafts:

No

Supports:

Yes

Resolution:

.2mm

Infill:

25%

Filament: Any PLA Matte Black


Notes:

I used a raft on only 1 part - Uxcell R55 Rear Bracket 002 - and printed it with the face with the two large holes facing down for the best strength.

Category: Parts

Tagi