Liczymy pasujące modele…
Also included .dxf files for milling Can also be used with 5/16" or 8mm Bolts and washer just insert the nut in the knob How I Designed This Category: Tools
Step blocks to properly hold thicker stock.
Here's links to the things I got on amazon to put in the slot at the bottom, and optionally reinforce the screw hole. The screws used were the ones that came with the CNC, but it's a 5mm threaded screw hole in the model, so any m5 should…
These positioning blocks I modeled up for the Shapeoko 5 Pro's hybrid bed. They're made to fit snugly with the track system and can be secured using the M6x25mm screws + T-nuts supplied with the machine. The horizontal pieces also include…
I wanted more T-nuts for my shapeoko pro hybrid table, so I made a print that accepts heat set inserts. These specifically (M6x10x7): https://www.amazon.com/gp/product/B08Z7541M5/ref=ppx_yo_dt_b_asin_title_o08_s00?ie=UTF8&psc=1 I insert…
[Update 2019-04-03] v4 released: Changed the files to be in MM so they open properly sized in many editors slicers Added a "fillbar" which can be placed over the top model and used as a way to add extra support in the print. ( See tip #2…
Remixed the original holder in Fusion 360, adding magnet holes. Plug remixed in OpenSCAD, wire slot width was reduced.
Carbide 3D Shapeoko 4 power supply mount. It may work for others but I haven't tried them. Fits 73mm wide x 36.5mm high power supplies. Easy print: Print on end vertically. No supports or brim needed crank the layer height up
This dust shoe is designed to work with the Inventables Spindle Carriage, P/N 80031 for the quietcut spindle. It should work with any Shakeoko, Shapeoko2 or Xcarve that has this particular spindle carriage. It's designed for a standard…
This STL is for the CNC GoPro mount and 100mm extension arm and will allow you to print it yourself. For hardware, we recommend this kit: https://amzn.to/3IO6a0l as our holder is designed to use an M5x20 bolt and M5 nut. If you want just…
This is a recreation of the basic Shapeoko CNC Bed Clamp originally made on printables by cejones2 with more clearance.
This is a cradle for a 2 1/2" dust hose which allows it to be mounted above the router/spindle on a Beaver HDZ z-axis. Fusion 360 design can be downloaded from here; https://a360.co/2zgJ9Ax Category: Tools
Designed to quickly connect a vacuum hose while keeping tension off of the shoe. The base piece fits around the Z motor and uses a clip to hold everything tight. The arm is attached to the hose with zip ties and can be slotted in and out…
The Shapeoko moves out over the front of the machine for bit changes, which has led to more than a few bits falling to the ground and breaking. This little tray clips onto the front of the machine to catch any bits that might slip out of…
I needed some solid mounts to attach the Inventables drag (cable) chains to my Shapeoko2. The drag chains came with the Shapeoko 2 "The Works" kit but didn't include a method to attach them to the machine. This is an assortment of cable…
A 3D printable mount for fitting a generic Chinese mist coolant sprayer to the Shapeoko HDM. Known coolant sprayer models that are compatible: STR-01 YS-BPV-3000 Designed in Solidworks; STEP and STL file of the mount is provided if…
This is a mount for the Arduino Uno for the Shapeoko2 intended for the right Y axis motor mount plate, as shown in Wiring Option 3 here: http://docs.shapeoko.com/wiring_3.html This design was based off of pieces from the following Things:…
Stackable if you don't leave your bolts in. 'nuff said.
I had some fitment issues using Wade Oler's bitsetter & probe holder on my 2015 Shapeoko 3, and decided to build one that would meet my design requirements: 30mm of height from by table surface to the top of the metal bar on the front of…
This is a belt tensioner for the Shapeoko 3. Simply turn a screw to tension the belts to your liking. It requires a slot to be made in the plates for the belt to exit. The tensioner can be used as a template to mark the location for the…
I designed this to work with a Shapeoko 3 model to help with bed sag in the middle of the bed on XL and XXL machines. Use this in conjunction with an extrusion style bed conversion or you can drill holes in your frame accordingly. I have…
Replacement for the standard "spindle mount" that comes with the shapeoko builder's kit. Print instructions Category: Machine Tools Instructions The original files came from: https://github.com/shapeoko/ShapeOko/downloads ,…
This secures a vacuum hose in place atop the Z-axis of a Shapeoko 3. The hose I use is 1.75" diameter - yours may be larger. This helps ensure the hose is not puting undue pressure or becomes pulled off the dustboot. The negative of this…
I recently got the Shapeoko 3 xxl and needed a vacuum adapter and i didnt like how the hose would pull on the Sweepy dust boot so i made a support bracket that mounts around the neck of the router to add a bit more support to the vacuum…
This step file generates a Shapeoko CNC laser mount. The resulting item can be used to enhance your Shapeoko CNC machine by adding laser cutting and engraving functionalities to it. The blueprint has been primarily designed for use with…
This is just a simple adapter for the Shapeoko Sweepy Dust Boot V2.0 to allow mounting a smaller 30mm dia vacuum hose. FreeCAD file included for tweaks. I used 5 perimeters and 15% infill with PETG. Category: Parts
I'm creating a CNC and I decided to adopt the Shapeoko plate because it is a standard. I just created a printing plate that allows you to use pressure nuts. Print Settings Printer: DIY Graber i3 Rafts: Doesn't Matter Supports: Yes…
Use this adapter to connect the Karcher WD5 35mm hose to the 45mm hole in the Suckit Dust Boot Plate. The connector on the positively connects to the Karcher hose connection and the other slip-fits to the dustboot. Print Settings…
This is a dust adapter to connect a 4" hose to your Shapeoko 5pro with an 80mm spindle. To create a tight seal to the sweepy mount I used 2 wraps of electrical tape
A mount for holding a hot wire foam cutter on the Shapeoko 3. Sources for foam cutter: https://www.amazon.com/DAOKI-Electric-Styrofoam-Cutting-Engraver/dp/B01LJ4D106…
Riemenspanner für HTD-3M Zahnriemen. Speziell für die Shapeoko2 DIY-CNC-Fräse Die benötigten Schrauben sind 4x M3x20mm Print Settings Printer: Dremel 3D20 Rafts: Doesn't Matter Supports: No Category: DIY
I was looking for a way to mount mechanical switches on the Z axis of my Shapeoko 2 and realized it might be nice to have a generic mount that could be mounted using a t-nut on any makerslide - z axis or otherwise. This is that attempt. I…
Just a Dial Indicator Mount I made for the Shapeoko 2 Rotary Tool Holder. Sized for a AccuRemote Digital Indicator:…
Use the following standard parts for build: 2x hexscrew M2x12mm 1x hex bolt M10x80mm Stainless Steel 1x brass tube Inner Diameter 10mm Outer Diameter 12mm, 20mm Length 1x microswitch How to: Cut the Hex bolt at 26mm under the Head Use a…
This is a CNC fixturing block using an M6 x 20mm SCHS bolt, and it is designed to work with the Shapeoko brand t-slot nuts, but should work with any others that do not protrude more than 2 - 3 mm above the top of the wide section of the…
A low profile version of the bitsetter for the Shapeoko 3 as to allow for longer bits. Hardware/Parts needed to complete build: 5x M3 nuts 5x M3 20mm screws 1x 16mm Momentary Push Button (https://www.amazon.com/gp/product/B012I0GSR8/) 1x…
This is the enclosure I made for my spindle speed controller for my shapeoko CNC. This model can be used to print a broken box or to see the fit on your CAD. or even get dimensions.…
Here are some new horizontal work-holding clamps for my ShapeOKO 2 that I designed in Fusion 360 and printed on a Makerbot Replicator 2. A video describing them is here: https://youtu.be/Z9x7S5f6Poc UPDATE: I went ahead and made another…
This is a modified version of nischi's Shapeoko pen holder, with mounting holes to fit the Shapeoko 2. Also, I modified the pen holder a bit to make it fit a standard Sharpie that is about 12mm in diameter. Lastly, I added a couple of…
This is a mount for the neje laser module (40640, but probably compatible with others too), so it can be mounted on the shapeoko (4). You can hang the mount on the left side of the router mount. It also contains a separate print file so…
Not much to say.
This is my first design on Tinkercad. I wanted a holder for my bitsetter on my Shapeoko cnc machine
The original JTech laser mount for the Shapeoko3 is convenient but reduces the X-axis and can wiggle on direction changes. This model allows the laser to mount in the router clamp and is more rigid. The trade-off is not having a magnetic…
This laser mount is fairly sturdy but easy to install and does not require removing the router/spindle. Printing No supports are needed. Infill and perimeters can be increased from defaults, but likely not needed unless you are really…
################### New version that doesn't require the Wuerth adapter: https://www.printables.com/model/1501286-wuerth-hose-adapter-for-shapeoko-5-pro-sweepy-v2 ################### Wuerth vaccum adapter for Shapeoko 5 Pro Sweepy V2…
This is an adaptation of iquizzle's great limit switch mount that he made (I love the captive nut design!). You can find his original here: http://www.thingiverse.com/thing:215514 In my case, I wanted to switch around the switches and…
My bristles were completely shot and I really wanted decent dust collection. I definitely didn't want to buy an entire sweepy simply to replace the bristles (as far as I could tell, the only C3D option) and I didn't want to wait 4 days…
This is the enclosure I made for my spindle speed controller for my shapeoko CNC to control my makita router speed. Watch in use :…
Minimalist mounting brackets for Uno electronics on Shapeoko 2 Instructions In order to mount the electronics of the Shapeoko onto the Y carriage you need an adapter so I decided to make the silliest ones I could (that still work fine).…
A hose guide system for a Shapeoko3. The top guide clips on and off the top of the machine for easy removal, and the rear clip can be pulled out of the opening as well if need be. Print Settings Printer Brand: Creality Printer: CR-10S…
Mounts to the left side of the spindle using M5x20mm Socket Head Cap Screw.
New version of my Wuerth vaccum adapter for Shapeoko 5 Pro Sweepy V2 (80mm VFD Spindle) This is compatible with Wuerth vacuum hose (ISS / TSS / HWS FLEXIBLE CLIPS 4M ISS 30-L/40-M/50-L Art. N° 0702400312 EAN 4056807807720) and frictions…
This bracket came on my machine (3XXL), not sure who originally made it but mine was broken. Here is a direct replacement.
This was all built in Shapr3d. I was tired of not having a good place to store it but needed it to be accessible. The only reason there are two pins for the 1/8 is that I dropped one and lost it then found it after replacing it. It should…
I have a Shapeoko CNC and it came with a Bitzero V1. This works ok but eventually I got very tired of having to select which bit I was using from the drop down menu every single time and there is no option to default it to the bit I use…
Also included .dxf files for milling Can also be used with 5/16" or 8mm Bolts and washer just insert the nut in the knob How I Designed This Category: Tools
This gimbal-style mount allows the dust hose (2.5in) to clear the HDZ and rotates freely to prevent sharp bends in the hose during the movements of the CNC. ASSEMBLY Insert the spacer into the base, and assemble the clamp with an M6 x…
To replicate this for your CNC, you will need the following: 3D Printed Fittings. 2 x ½" Threaded Black Iron Pipe ( amzn.to/3XcirUP ). Length as desired (For my 4x4 Shapeoko 5 Pro, I use 48" long pipes for the vertical and horizontal…
I leave these adapters permanently attached to an extra 10' x 2.5-inch hose (that I keep handy in the CNC's cabinet) to quickly connect and swap between my Shapeoko 5 Pro CNC and other accessories. CNC (4x4 Shapeoko 5 Pro) with the extra…
In this little project you will find the following files: An upper mount to fix a Dremmel 3000 milling machine on the Shapeoko 2 header (sometimes a Makita is used instead, not my case). The mount fits perfectly with the metallic holder…
Can be modified to fit your needs. Holds Scissors, a digital caliper, wire brush, Shapeoko collets, wrenches, Allen keys, bolts, Shapeoko T-slot nuts, and Shapeoko clamps.
The adapters that came with the Sweepy on my Shapeoko4 were not the right fit for my regular ShopVac. I designed the adapter to fit in the Sweepy with the larger round adapter and then designed the hose holder that fits on the Z-axis…
Holder for the the Shapeoko workholding set that came with the Shapeoko 4
Heres a spacer/extender I made for my Shapeoko 5 pro's dust boot. I have a few cutters that are too long for the boot to effectively collect the dust. Because of the two part magnetic assembly of the Sweepy 2.0, it makes it very simple to…
This is a cradle for a 2 1/2" dust hose which allows it to be mounted above the router. Category: Parts
This is a mount for a z-axis probe on a Shapeoko 3. It screws into the collet mount on the Dewalt 611. It is designed to hold a momentary push button like this one: http://tinyurl.com/y84py4ky I built it to work along with the auto…
I have several upcoming projects that require 48.5" x 48.25" plywood sheets on my 4x4 Shapeoko 5 Pro CNC. I designed this clamp for situations where the stock covers the entire spoil board or is flush with the front or back edge.…
These are designed to fit the Shapeoko z-clamps (https://carbide3d.com/3d-print/z-clamps/) and adapt them for any height needed. They fit an M6 bolt, and should be printed with TPU. They are 1, 2, 4, and 8mm to allow for any increment to…
No supports needed. The gap is small enough for bridging. Loosely zip tie the vac hose to the bracket to hold it in place while machine is running but not to tight that you cant slide the hose in and out for dust shoe height adjustment.
Shapeoko pen mount. Instructions You may need to adjust the hole size for your pen using OpenScad file. To attach it you will need, 2x Makerslide T-Slot nuts 2x M5 x 10 machine screws Category: Parts
Shapeoko 2 Dust Shoe - For Stock dremel type spindle
Support for dc motor type "775". Made for Shapeoko's Z axis support, but nothing prevents it from being used on other machines. I created a plate for Shapeoko Z-Axis to be printed in 3D: https://www.thingiverse.com/thing:2894914 You're…
This mount attaches to the side of the Y-Axis Gantry plate and allows more space for the terminal strips. The terminal strips are connected to the 2 Y-Axis and single X-Axis motors. This allows cleaner wiring to the GRBL Shield. The slots…
This mounts the JTech Dual Pro 14W 445nm laser head to a Carbide3d ShapeOko router spindle. The existing mount is 3d printed. This will require similar magnets and pins as the existing mount, but will give you more adjustment, increase…
This secures a vacuum hose in place atop the Z-axis of a Shapeoko 3. The hose I use is 1.75" diameter - yours may be larger. This helps ensure the hose is not puting undue pressure or becomes pulled off the dustboot. The negative of this…
This is designed to fit on the dewalt spindle holder This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/0IxYbYgLD6v Category: 3D Printing
Print out of PETG for more flex. Printed it at 30% infill to make sure it's strong and holds well. Enable supports from bed as needed.
This is an attachment to fit a shop vac to the dust collector included with the Shapeoko CNC machine. The shop vac I have at home didn't fit into the opening without hitting the router. To get around this, I designed and printed this…
I required a more stable boot than the ones provided on here. It also uses straight pathways for the nylon bristle brushes. This allows easy swap out if they are damaged and also easy install in the beginning. Required: 8 - 0.125x3/16"…
Use these to take up the gap when using limit switches on a shapeoko 2 Category: Machine Tools
I ordered the Shapeoko 3, but they forgot to put the spindle mount in the package. Because post takes a loooooong time to arrive on the place where I live, I redesigned this mount so I am able to use it, while waiting for the part to…
This gimbal-style mount allows the dust hose (2.5in) to clear the HDZ and rotates freely to prevent sharp bends in the hose during the movements of the CNC. ASSEMBLY Insert the spacer into the base, and assemble the clamp with an M6 x…
To replicate this for your CNC, you will need the following: 3D Printed Fittings. 2 x ½" Threaded Black Iron Pipe ( amzn.to/3XcirUP ). Length as desired (For my 4x4 Shapeoko 5 Pro, I use 48" long pipes for the vertical and horizontal…
I leave these adapters permanently attached to an extra 10' x 2.5-inch hose (that I keep handy in the CNC's cabinet) to quickly connect and swap between my Shapeoko 5 Pro CNC and other accessories. CNC (4x4 Shapeoko 5 Pro) with the extra…
