1 / 6
Front & Back Edge Clamp for Shapeoko CNC Hybrid Table
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This clamp slides into the T-Track at the front & back edge of the spoil board, allowing to use the entire work surface.
- Ocena
- 0 / 5
- Polubienia
- 10
- Wydruki
- 0
- Wyświetlenia
- 536
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Standard Digital File License
SzczegółyPliki (5)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (22)Powiązane
I have several upcoming projects that require 48.5" x 48.25" plywood sheets on my 4x4 Shapeoko 5 Pro CNC. I designed this clamp for situations where the stock covers the entire spoil board or is flush with the front or back edge.
Specifications:
- Stock thickness: 3-26mm (1/8" - 1") depending on your spoil board thickness.
- I created three different TOP parts to cover as wide a range as possible.
- Stock position: 10mm overhang (outside the table) - 15mm inset (inside the table).
- Hardware: M6 Square Nuts and M6 x 30mm Socket Head Screws.
- Compatible with Carbide3D Hybrid Table (Shapeoko HDM, 4, 5, Pro).
3D Print Settings:
- I used PLA with 100% infill for maximum rigidity/strength.
- The bottom part does NOT require support. I added a sacrificial layer built into the model that can be removed after printing.
- The top part requires support. For a clean and firm surface, I used PLA Support for the interface layer (PETG can work as support interface too). “Normal” supports are OK too!
