Shapeoko CNC HDZ Z-Stepper Gimbal Mount for 2.5-inch Dust Hose
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Use this Gimbal to mount a 2.5-inch dust collection hose over the Z-Stepper of the Shapeoko's HDZ.
- Ocena
- 0 / 5
- Polubienia
- 13
- Wydruki
- 0
- Wyświetlenia
- 697
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Standard Digital File License
This gimbal-style mount allows the dust hose (2.5in) to clear the HDZ and rotates freely to prevent sharp bends in the hose during the movements of the CNC.
ASSEMBLY
Insert the spacer into the base, and assemble the clamp with an M6 x 16mm flange button head screw (amzn.to/3Myp26Z):

INSTALLATION
Install over the HDZ's Z-Stepper and secure with a M4 x 16mm screw and nut (make sure not to pinch the cables):

Ensure the M6 screw does NOT rub against the z-stepper shaft (leave some clearance):

Leave some slack in the hose to allow for full Z travel.

OPERATION
Related models:
- Shapeoko HDZ Z-Stepper Gimbal Mount for 2.5-inch Dust Hose
- Dust Collection Adapters for 2.5-inch Hose