Shapeoko2 Arduino Uno mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a mount for the Arduino Uno for the Shapeoko2 intended for the right Y axis motor mount plate, as shown in…
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 57
- Wydruki
- 0
- Wyświetlenia
- 356
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Share Alike
This is a mount for the Arduino Uno for the Shapeoko2 intended for the right Y axis motor mount plate, as shown in Wiring Option 3 here: http://docs.shapeoko.com/wiring_3.html
This design was based off of pieces from the following Things: http://www.thingiverse.com/thing:33327 http://www.thingiverse.com/thing:114500
I've found the board screws in nicely to the plastic using a short #2 screw (around 1/4" or so) like this one:
http://www.grainger.com/product/Wood-Screw-1LA56?s_pp=false
Instructions
Printed on a makerbot replicator2. A sketchup file and a STL file are provided. The STL file has already been run through netfab and had repairs made, so use it for printing (it has repaired in the name). The sketchup file is just provided in case you want to make modifications. In that case, you should probably run it through netfab after you export to STL.
The outer holes are meant to be through-bolt holes for whatever fastener you deem appropriate. The inner posts are meant to be used with small plastic self tapping screws - something like a #2 plastic screw might work.
Category: Electronics