Dial Indicator Mount for Shapeoko 2 Rotary Tool Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Just a Dial Indicator Mount I made for the Shapeoko 2 Rotary Tool Holder. Sized for a AccuRemote Digital Indicator:…
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 19
- Wydruki
- 0
- Wyświetlenia
- 191
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Share Alike
Just a Dial Indicator Mount I made for the Shapeoko 2 Rotary Tool Holder. Sized for a AccuRemote Digital Indicator: https://www.amazon.com/gp/product/B006YD7G36/ref=as_li_qf_sp_asin_il_tl?ie=UTF8&camp=1789&creative=9325&creativeASIN=B006YD7G36&linkCode=as2&tag=illc0mmunicat-20&linkId=MRGNX2V26LTAZZPA
Based this off of lordmundi's Pen Holder, however the .SKP file included in his thing was a bit of a mess (looked like a STL converted to SKP). So I created this .SKP from scratch.
Washed my .STL through the Netfabb cloud service for good measure.
Instructions
Printed in ABS, .2mm layer height, .25% infill, 4 perimeters, solid infill every 15 layers (I just like this), and a 5mm brim just for safety. Holes are sized for M5 and M3 screws.
Category: Parts