Fractal Design R5 Extra 3 Drive Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
easy extra 3 drives
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 18
- Wydruki
- 0
- Wyświetlenia
- 198
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution
I wanted a thing to fit some extra drives in my R5 case so i modified the model for the 7XL to fit some extra drives. Depending on if you are using the fan on the side panel of the case you may need to rotate your drives, I had to place my drive upside down to move the connectors out of the way, also I did not use any screws to hold the drives in place, maybe you could use the screws if the drives were the right way up but you don't really need them if you are not moving the system.
this model prints really easy if you just lay it on its side, also 1 side of the mounting cylinder is flat to make it easier for printing with supports, I did not want that cylinder to lose its circularity and not fit.