Mini R53 Clutch Valve Cylinder Compressor Jig
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A 3D printable jig for compressing a clutch valve cylinder found on an 2001-2006 R53 Mini Cooper S.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 22
- Wydruki
- 0
- Wyświetlenia
- 112
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- GNU General Public License v3.0
This is a printed jig which is used to compress the clutch valve cylinder for bleeding found on an R53 Mini Cooper (model year 2001 - 2006). This is designed to be used with a pair of M8 nuts and threaded bolts greater than 90mm in length.
Printing on an Anycubic Kobra S1 at 0.20mm layer height took ~1.5hrs at excellent strength and cosmetic quality. This printed jig consumes ~46g of filament. Supports are required to print this model. Also included is a thinner, shorter version.
The recommended filament type is PETG or PETG derivatives (such as PETG+, or PETG High-Speed).
Instructions for use:
Slide each bolt through the holes of the jig and the clutch slave cylinder, attaching the nut at the end of the thread.
Slowly tighten the bolts evenly until the spring is fully compressed. The jig must have slid over the lip of the clutch valve cylinder in order for it to be fully compressed.
I do not claim any responsibility for misuse or otherwise of the supplied files, instructions or the product thereof.