Professional Lipo battery Case Holder 5000mah battery Model No : KP 104065
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
this is a robust casing for 5000mah lipo battery and useful for connecting multiple batteries easily and in professional
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 29
- Wydruki
- 0
- Wyświetlenia
- 180
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
🖨 Manufacturing Process
Type of Machine: FDM (Fused Deposition Modeling) 3D Printer
Recommended Printer Models: Prusa i3 MK3S+, Ender 3, Bambu Lab P1P/X1, Anycubic Kobra, etc.
Print Technology: FDM only (not compatible with resin or SLA)
🧱 Material Recommendations
Primary Material:
PETG (recommended) for thermal stability and toughness
PLA+ (acceptable) for general use, indoor environments
ABS (optional) for high-heat environments, enclosed printer required
Filament Diameter: 1.75 mm
Nozzle Size: 0.4 mm (default)
📐 Print Settings
Layer Height: 0.2 mm (standard), or 0.1 mm for smoother finish
Wall Line Count: 3
Top/Bottom Layers: 5
Infill Density: 30% (Gyroid or Grid for mechanical strength)
Print Speed: 45–60 mm/s
Supports: Required only for overhangs near terminal mounts
Brim/Raft: Optional (recommended for PLA+ to avoid warping)
Estimated Print Time: ~2.5 to 3 hours (depends on printer model)
Cooling Fan: On for PLA+, reduced for ABS
🔩 Assembly Instructions
Insert the 5000mAh 3.7V 1S LiPo battery into the holder. Ensure tight fit but do not force.
Place the nickel strips over the contact points aligned with screw holes.
Solder the red wire (positive) to one end of the first nickel strip.
Solder the black wire (negative) to the opposite nickel strip.
Use small M2.5 or M3 screws to fix the nickel strips to the case’s terminals securely.
Ensure proper insulation from surrounding components before applying power.
💡 Optional: Add heat shrink tubing or a printed cap/lid for added protection.
📎 Online Assembly Guide: [Create a walkthrough using Cadasio for visual instructions — include part numbers, orientation diagrams, and cable routing.]
(Let me know if you'd like help creating this guide or a STEP file upload.)
⚠ Safety and Compliance
Electrical Safety: Ensure all connections are insulated and voltage-rated wires are used.
Use Case: Not suitable for high-voltage or medical-grade applications.
Child Safety: Contains small parts; not intended for children under 14.
Food Contact: Not food-safe; do not use with consumables.
Heat Resistance: PETG recommended for environments >50°C; PLA may soften.
Battery Safety: Only use with verified 1S 3.7V LiPo batteries. Monitor charging and discharging with a proper BMS or protection circuit.