Liczymy pasujące modele…
UPDATE 2: I am selling the 5000mAh version with USB-C charging, and Callsign customization in my ETSY shop: https://k1tdgtech.etsy.com UPDATE1 : I just uploaded a new version of the 5000mAh case that will allow the radio to stand at a…
Modified version of Alley Cat's Heltec LoRa 32 V4/V3 Slim Case, resized to accommodate a 5000mAh LiPo battery.
Remix of https://www.printables.com/model/157125-heltec-wifi-lora-32-v2-ttn-mapper-case to fit a larger battery. I made this case bigger to fit more battery. I used a 5000 mAh battery (656090), but there is room for a thicker 120x60x90 mm…
A spacer to keep the 5000 mah lithium-ion battery from banging around in the battery tray. This will keep everything locked in place.
I actually bought the wrong size of the 21700 batteries, I did not know that the 5000mAh cell was physically bigger. Anyway, I designed this to fit the 5000mAh versions of the 21700 cells. You have to sacrifice the original battery basket…
A1 Mini Compatible This is a print & play no cut backplate mod and spacer for the New 3DS XL that allows for the use of a 5000mAh battery & Micro SD Card Extender which can be found on amazon, ebay, or aliexpress. This is the final…
A dock for 2 Ugreen power banks as detailed in the video above! Hardware 2 x 25mm M3 screws for eject arm pivots 2 x 12 x 5mm springs (or similar) 2 x 12mm M3 countersunk screws 2 x UGREEN Cables (Ugreen US286) Printing Instructions I…
Hi, I made cheap, small and powerful powerbank and I love it! let's see it. You need M3 screw 8mm long module with IP5310 chip 21700 battery (I use INR21700-50E)
Scanned with Creality Sermoon S1.
I didn't want the top screws of the F450 frame damaging my lipo so I designed this top plate that carries a 5000MAH 3S battery and has room in the corner for a GPS mast and mount. Thanks for checking out my model I hope it helps you, if…
Update: Also works with the Trackit SR Scan used for design: https://www.printables.com/model/1413825-ugreen-nexode-25000mah-powerbank-scanhttps://www.printables.com/model/1413825-ugreen-nexode-25000mah-powerbank-scan Usage This mount is…
Hello. This is a case for Lipo 50c 3S 11.1 V 5000 mAh batteries with dimensions: Length: 137 mm Width: 44mm Thickness: 24mm Balancing plugin: XH Fitter. Put the battery inside, then glue the two halves together, I used superglue.…
It's a significant upgrade in battery life compared to the 1400mah battery the New3DS comes with. Here's a lil demo video UPDATES: V3: I revised V2 and fixed a couple of holes and dents. It prints fine. I consider this the "final"…
NEW VERSION! This is the first rough draft for a custom back plate and spacer for the New 3DS XL that allows for the use of a 5000mAh New Li-ion E which can be found on amazon, ebay, or aliexpress. This is the first draft of this project…
No supports required. 0.2 layer height 2-3 perimeters Printed in PETG for outside mounting in weatherproof box
A alternative Powerbank holder for the quest 2 default strap for longer gaming time and better weight distribution on the head :) Just print it upside like in the screenshot with a small support on the two clips. You can easely clip the…
🖨 Manufacturing Process Type of Machine: FDM (Fused Deposition Modeling) 3D Printer Recommended Printer Models: Prusa i3 MK3S+, Ender 3, Bambu Lab P1P/X1, Anycubic Kobra, etc. Print Technology: FDM only (not compatible with resin or SLA)…
I could not find a case sized small enough to just enclose and protect the Anker 621 MagGo power bank. I saw Ariel 3D's TPU iPhone battery pack case and thought it would work out nicely if scaled to the right size. Printed mine in Sain…
A scan of the ELECOM NESTOUT 15000mAh battery pack. Learning to use my new 3D scanner, just putting this model out there if anyone needs it. Not a perfect scan but a lot of the key dimensions are there.
For a while wanted to have very light power bank mount for my Quest 2/Rift CV1 strap with option to quick swap batteries when needed without even taking off the headset. Decided to use extremely power dense but very light Nitecore 5000mAh…
I use this packs to power my goggles, because I don't like having loose cables hanging around to my battery in the pocket. The 2s5Ah battery lasts me one complete racing day and recharge takes around 3-5hrs, depending on your USB charger…
I would strongly advise to use supports for this case and outer/inner Brim, if its stands on the two sides were it connects with your new 3ds. You also have to put supports on the latch/locking tabs (see picture with blue circles). If you…
I needed a bigger enclosure to fit my battery. Modified with Fusion and sliced with Prusa Slicer for fuzzy skin Printed at 0.2 nozzle size with no supports using PETG on my Flsun QQS-Pro.
Print WITH suport on plate only. Imprimir con soporte solo en placa de impresión (árbol preferentemente)
This is used to hold battery pack for gopro on Joby tripod. Hold clips over joby leg and gets secured into place with a zip tie. Also mount that helps hold Monoprice 5000Mah battery pack in place on battery holder.
No supports required. 0.2 layer height 2-3 perimeters Printed in PETG for outside mounting in weatherproof box
Print WITH suport on plate only. Imprimir con soporte solo en placa de impresión (árbol preferentemente)
