Jumper T20 - 21700 Battery Basket (5000mAh)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I managed to push 2x5000mAh 21700 batters in to the Jumper T20. But it's a REALLY tight fit. :)
- Ocena
- 0 / 5
- Polubienia
- 15
- Pobrania
- 131
- Wydruki
- 0
- Wyświetlenia
- 1362
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- GNU General Public License v2.0
I actually bought the wrong size of the 21700 batteries, I did not know that the 5000mAh cell was physically bigger. Anyway, I designed this to fit the 5000mAh versions of the 21700 cells. You have to sacrifice the original battery basket to salvage the metal parts, wires and the connector. I also added a bit of thin tape around the cells before putting them in to the radio, just in case. The basket is a bit “flimsy” because it's a very tight fit, so when it's not in the battery-compartment it bends a bit because of the springs. But when inside the radio, it fits like a glove. :)
I printed mine in PETG. But I'm guessing PLA will work as well.
No support needed. :)
PS: The last picture is the original battery basket…