Nap CubeNode; The case for seeed xiao Esp32 + Wio-sx1262
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Nap CubeNode is a case for the ESP32-S3 + Wio-SX1262 kit from Seeed XIAO, designed for Meshtastic.
- Ocena
- 0 / 5
- Polubienia
- 16
- Pobrania
- 107
- Wydruki
- 0
- Wyświetlenia
- 986
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Public Domain
Helloo!
Here’s my second case for Meshtastic!
This time it’s designed for the ESP32 with the SX1262 from Seeed XIAO, using soldered pins.
To reset the device, just insert a Bic ink tube through the hole to press the reset button.
Extras needed:
SMA to IPEX pigtail (5 cm or shorter is ideal)
Glue
(Optional but recommended) A smaller Bluetooth antenna – though the stock one can still be crammed in.
Assembly steps:
Stick the BLE antenna in place in the bottom.
Position the kit.
Screw the IPEX connector into the cap of the node.
Tuck the cables inside.
Glue the top and bottom parts together.
To disassemble it:
You can either pry it open or insert a small hook through the hole to break off the top part.
Pay for my silly things :3
https://ko-fi.com/nallopro