Sparkfun Redboard Enclosure for ESPHome CN105
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Enclosure for Sparkfun Redboard w/ Seeed Xiao ESP32-S3 and level shifters
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 9
- Wydruki
- 0
- Wyświetlenia
- 91
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution
Enclosure for custom ESPHome device for Mitsubishi Heat Pump Control using the CN105 port and this project: https://github.com/echavet/MitsubishiCN105ESPHome
Specifically, see breadboard layout and components in this post: https://github.com/echavet/MitsubishiCN105ESPHome/discussions/273#discussioncomment-13109420
The board mounts to the enclosure using M2 screws and washers, which I got from this kit: https://www.amazon.com/dp/B0CQJZCC9T?ref=ppx_yo2ov_dt_b_fed_asin_title
Model created using YAPP_Box, specifically this version: https://github.com/mrWheel/YAPP_Box/blob/299c3058de3990aad7f5ee1a1e9bcb5b1b134a5e/YAPPgenerator_v3.scad. You will need that file if you want to modify the source openscad file.
No special printing instructions. I printed in PETG at 0.2mm layer height. No supports needed.