Sparkfun Redboard Enclosure for ESPHome CN105
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Enclosure for Sparkfun Redboard w/ Seeed Xiao ESP32-S3 and level shifters
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 9
- Makes
- 0
- Views
- 91
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution
Enclosure for custom ESPHome device for Mitsubishi Heat Pump Control using the CN105 port and this project: https://github.com/echavet/MitsubishiCN105ESPHome
Specifically, see breadboard layout and components in this post: https://github.com/echavet/MitsubishiCN105ESPHome/discussions/273#discussioncomment-13109420
The board mounts to the enclosure using M2 screws and washers, which I got from this kit: https://www.amazon.com/dp/B0CQJZCC9T?ref=ppx_yo2ov_dt_b_fed_asin_title
Model created using YAPP_Box, specifically this version: https://github.com/mrWheel/YAPP_Box/blob/299c3058de3990aad7f5ee1a1e9bcb5b1b134a5e/YAPPgenerator_v3.scad. You will need that file if you want to modify the source openscad file.
No special printing instructions. I printed in PETG at 0.2mm layer height. No supports needed.