Pedestrian Traffic Light - Ampel (fuer Fussgaenger)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Pedestrian Traffic Light for WS2812 (Neopixel) to programmable with Arduino, ESP32, Raspberry, Microbit, Calliope ...
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 83
- Wydruki
- 0
- Wyświetlenia
- 384
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Open Community License v1
Description
Pedestrian Traffic Light
Quick and easy to build - Snap fit - no screws needed
Final dimension assembled: 4x4x15cm (LxWxH)
- No support
- Orientation as in the files
- Infill 15%
- Material: PLA
Parts needed
- 1x WS2812 / Neopixel stick (or similar e.g. https://www.roboter-bausatz.de/p/8bit-rgb-led-leiste-aehnl.-neopixel
- Jumper cable ≥ 20cm e.g. https://www.roboter-bausatz.de/p/40-pin-dupont-jumper-kabel-buchse-stecker-40-cm
- Microcontroller (Raspberry, ESP32, Arduino , Calliope,…)
Cut
Cut 2 pixel from the stick to make it fit into the housing. (see pictures)
Solder
Cut the jumper cable on one side and solder it to the LED stick (GND, 5V, DIN)
Assemble
- Insert the stick
- Fix the stick by using the spacer
- Push the cable including connector through the standpipe
- Connect the stand pipe
Connect & Code
Pls. note that the WS2812 (Neopixel) stick is directly connected to the controller. It does NOT need a own power source. Connect just the controller.
This is possible by using only a few LEDs. The controller can deliver enough current. Voltage 3.3V or 5V does not matter in this case.
Calliope:
LED Stick 5V → Calliope +
LED Stick GND → Calliope -
LED Stick DIN → Calliope P0
ESP32:
LED Stick 5V → ESP32 3.3V
LED Stick GND → ESP32 GND
LED Stick DIN → ESP32 D16
Code example: see https://www.printables.com/model/864750-traffic-lights-ampel-for-arduino-esp32-co
Arduino:
LED Stick 5V → Arduino 5V
LED Stick GND → Arduino GND
LED Stick DIN → Arduino D6
Code example: see https://www.printables.com/model/864750-traffic-lights-ampel-for-arduino-esp32-co
You like it?
Leave a picture of your make and a “LIKE”
The traffic light visible in the background you can find at: https://www.printables.com/model/864750-traffic-lights-ampel-for-arduino-esp32-co
Problems?
Drop me a line by PM and I will try to help.
######################################################
More information about Neopixel, code examples, connections and warnings at: https://learn.adafruit.com/adafruit-neopixel-uberguide/the-magic-of-neopixels.
The sample code has been tested with original Adafruit Neopixel sticks and may require adaptation when using other sticks.
Disclaimer
Pls check the data sheet of your microcontroller before connecting.
I do not take any liablity for damages or injuries. Build and use at your own risk. The linked products and pages are for reference only. I dont get paid from the owners.
#######################################################