1 / 4
Clamp mount for table legs - Uses an M6 bolt and nut — zdjęcie 1
1 / 4

Clamp mount for table legs - Uses an M6 bolt and nut

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Allow for quick and easy mounting and disaembly of table legs. Just untighten the clamp and the legs come out.

Ocena
0 / 5
Polubienia
5
Pobrania
5
Wydruki
0
Wyświetlenia
94
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

I have been using that design for a while to have different size tables easy to put up and store.

 The table legs have a slot to slide in and out of the clamp. This allows putting and removing the legs without having to take the bolt/nut off. Just loosen the nut and the legs slide out.

The 2 sides of the clamps are identical. Prints without support.

The bolt is a “DIN 603 - mushroom head square neck bolt” and on the other side a regular hexnut and wacher is used to tighten the clamp.

Each side of the clamp is mounted to the tabletop with 2 screws.

The length of the bolt should be chosen to suit the thickness of the legs to clamp.

As a wheel nut, I am using this butterfly nut for M6:

https://www.printables.com/model/1293990-butterfly-nuts-for-m4-m5-and-m6

 

 

Tagi