Clamp mount for table legs - Uses an M6 bolt and nut
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Allow for quick and easy mounting and disaembly of table legs. Just untighten the clamp and the legs come out.
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 5
- Makes
- 0
- Views
- 94
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution
I have been using that design for a while to have different size tables easy to put up and store.
The table legs have a slot to slide in and out of the clamp. This allows putting and removing the legs without having to take the bolt/nut off. Just loosen the nut and the legs slide out.
The 2 sides of the clamps are identical. Prints without support.
The bolt is a “DIN 603 - mushroom head square neck bolt” and on the other side a regular hexnut and wacher is used to tighten the clamp.
Each side of the clamp is mounted to the tabletop with 2 screws.
The length of the bolt should be chosen to suit the thickness of the legs to clamp.
As a wheel nut, I am using this butterfly nut for M6:
https://www.printables.com/model/1293990-butterfly-nuts-for-m4-m5-and-m6
