1 / 6
Dart Zone Max stryker 2.0 Priming Block Repair/Reinforcement Insert for High Power Spring (FreeCAD source included) — zdjęcie 1
1 / 6

Dart Zone Max stryker 2.0 Priming Block Repair/Reinforcement Insert for High Power Spring (FreeCAD source included)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

My Max Stryker 2..0 broke while using the official Dart Zone high power spring and I repaired it with this shim!

Ocena
5 / 5
Polubienia
25
Pobrania
94
Wydruki
0
Wyświetlenia
726
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Outdoor Toys
Licencja
BSD License

The shim comes in two parts one for each half of the priming sled. The pieces are labelled as such. Assemble them into the priming sled as seen in the photos.

 

Because I used it specifically for a repair I super glued the shims in place to the shell of the sled but not to each other. If you are using the shim for reinforcement but not repair you might not need adhesive.

 

Printing Advice

I used 100% infill and switched back to the regular spring and this shim has survived a Nerf war day so I recommend 100% infill.

Tagi