1 / 6
Dart Zone Max stryker 2.0 Priming Block Repair/Reinforcement Insert for High Power Spring (FreeCAD source included)
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
My Max Stryker 2..0 broke while using the official Dart Zone high power spring and I repaired it with this shim!
- Rating
- 5 / 5
- Likes
- 25
- Downloads
- 95
- Makes
- 0
- Views
- 727
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Toys
- License
- BSD License
The shim comes in two parts one for each half of the priming sled. The pieces are labelled as such. Assemble them into the priming sled as seen in the photos.
Because I used it specifically for a repair I super glued the shims in place to the shell of the sled but not to each other. If you are using the shim for reinforcement but not repair you might not need adhesive.
Printing Advice
I used 100% infill and switched back to the regular spring and this shim has survived a Nerf war day so I recommend 100% infill.
