1 / 4
GEPRC Cinelog 30 V3 GPS Matek M10Q & 3901-L0X — zdjęcie 1
1 / 4

GEPRC Cinelog 30 V3 GPS Matek M10Q & 3901-L0X

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Mount for GPS and Crossfire antenna and Lidar sensor for Cinelog30v3 drone.

Ocena
0 / 5
Polubienia
9
Pobrania
96
Wydruki
0
Wyświetlenia
812
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
RC & Robotics
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Two designs one for GPS Matek M10Q and Crossfire antenna mount in the back.

Important info about GPS!

Mount it is made low profile so You'll need to unsolder bottom connectors and solder wires directly to GPS.

Can also hold DJI O4 Pro antennas with proper silicon rubber.

I've changed antennas to TrueRC LHCP Omnidirectional (they have longer SMA cables).

Second design is for front mounted lidar sensor from Matek 3901-L0X.

For lidar You need 3mm hole in bottom frame to pass through wires.

Tagi