1 / 4
GEPRC Cinelog 30 V3 GPS Matek M10Q & 3901-L0X
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Mount for GPS and Crossfire antenna and Lidar sensor for Cinelog30v3 drone.
- Rating
- 0 / 5
- Likes
- 9
- Downloads
- 96
- Makes
- 0
- Views
- 812
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Two designs one for GPS Matek M10Q and Crossfire antenna mount in the back.
Important info about GPS!
Mount it is made low profile so You'll need to unsolder bottom connectors and solder wires directly to GPS.
Can also hold DJI O4 Pro antennas with proper silicon rubber.
I've changed antennas to TrueRC LHCP Omnidirectional (they have longer SMA cables).
Second design is for front mounted lidar sensor from Matek 3901-L0X.
For lidar You need 3mm hole in bottom frame to pass through wires.