P
PrintablesSilor_
Nejlepší matka - vtipný dárek na den matek (matka roku)
Klasická prusa matka s přidaným textem. Doufám, že vaše matka má taky smysl pro humor :D Na obrázku je vytištěná 150% velikost
- Downloads
- 814
- Likes
- 116
- Rating
- 4.95
Search results: matek
115 models
P
Printablessamh
Matek ASPD-4525 Pitot Tube
Reference CAD files for Fusion 360 for design of mounts, etc. Measured from part Fusion 360 f3d file included
- Downloads
- 376
- Likes
- 7
- Rating
- 0
P
PrintablesJonas
MATEK F405 Wing v2 bracket
Since I did not find a suitable bracket which was sturdy enough and did not interfere with the wiring, i designed my own. It can be printed without supports. The top plate has an opening for the build-in LED light and a few cutouts in the…
- Downloads
- 272
- Likes
- 8
- Rating
- 0
P
Printablesbillyd
Atomrc Penguin Plastic Nose and Plastic Nose for Matek Airspeed Sensor and VTX Plate
***Update Oct. 28 2025*** I now include the stock vtx plate exact replica, STL and STEP files included This is a model of the atomrc penguin's plastic nose that screws on to the front. You can print one in any color to accent your…
- Downloads
- 234
- Likes
- 13
- Rating
- 5
P
PrintablesNikosSprocket
Anti-Vibration Shock Absorber Damping Plate for MATEKSYS H743-SLIM Flight Controller (Updated)
FAQ I have built a X500 size quad-copter and I needed to reduce the vibrations to the MATEKSYS H743-SLIM Flight Controller as much as possible. This module will only fit the MATEKSYS H743-SLIM v2 and v3 flight controllers. To complete…
- Downloads
- 217
- Likes
- 18
- Rating
- 0
P
PrintablesPhilPhil
GOKU GM10 Mini V3 / Matek M10Q-5883 GPS Holder for BOB75 Frame
I love to make useful 3D Desgins, and i love Coffee: Buy me a Coffee: https://www.buymeacoffee.com/phitscho Or Twint me something over 078 713 68 61 THANKS! GOKU GM10 Mini V3 GPS Holder for BOB75 Frame with a 32x32 M3 Mounting. How to…
- Downloads
- 204
- Likes
- 13
- Rating
- 0
P
Printables406FPV
Matek M10-5883 GPS/Compass Mount
Here is my gps mount that will fit any quadcopter that has a 32mm spacing back plate and 20 mm high standoffs. was designed for the AOS series of qaud copters but will fit anything that has a back spacing of 32mm. printed with ninja flex…
- Downloads
- 178
- Likes
- 3
- Rating
- 0
P
PrintablesAlfred
Matek F405-Wing mount
Simple mount for the F405-Wing Flight Controller. I found several designs, but in my opinion they were all to clumsy and big. This one is tiny and the FC removes towards the top, so also useful in tiny flying wings. I created 2 versions,…
- Downloads
- 160
- Likes
- 9
- Rating
- 5
P
PrintablesManbehindthemadness
Mateksys Optical Flow and Lidar Sensor
This is a sizing blank
- Downloads
- 136
- Likes
- 8
- Rating
- 0
P
PrintablesBunk
Matek F405 WMN Mount
Designed two versions: Called The Easiest- just attach fc to the mount with m2 screws, and glue in the mount to the wing or screw it with m3 screws (30x30mm) Called Slide In- slide fc in the mount, than screw it up with m2 screws. You can…
- Downloads
- 120
- Likes
- 7
- Rating
- 0
P
PrintablesMonsterMaxx
AOS UL5 O3 Antenna and Matek M10-5883 GPS Mount
I needed an antenna and GPS mount for the AOS UL5, and thought I'd share it. This is for the O3 Antenna and the Matek M10-5883 GPS. Printed in TPU w/ 50% infill it came out under 5g This is a work in process, feedback is always welcome.
- Downloads
- 115
- Likes
- 4
- Rating
- 0
P
Printablessamh
mLRS Matek Tx Mount (JR Bay) for USB/SiK
A clip-in enclosure for the Matek mR900-30-TX or mR-24-TX. If you are using these as a dedicated SiK telemetry replacement using USB serial connection, you can use this mount to protect the rear of the PCB and mount your mdem somewhere…
- Downloads
- 103
- Likes
- 3
- Rating
- 0
P
PrintablesPsynixx
ImpulseRC Apex Matek M9N-5883 GPS mount
A quick and dirty adaption of the Matek M9N-5883 holder for the 5" ImpulseRC Apex frame. Mounts the GPS out the back and at a slight angle. Use self-tapping screws or machine screws + superglue as a ‘threadlocker’. Can also put down a…
- Downloads
- 99
- Likes
- 4
- Rating
- 0
P
Printablesbsprange
Matek M8Q5883 GPS holder with strap for drones
This GPS mounting bracket includes a strap to more securely hold the GPS module. Great for Drone or other uses where the GPS module could fall out. It also provides some isolation for the modlue from the chassis of the vehicle. Designed…
- Downloads
- 98
- Likes
- 7
- Rating
- 0
P
PrintablesDamian Mróz
GEPRC Cinelog 30 V3 GPS Matek M10Q & 3901-L0X
Two designs one for GPS Matek M10Q and Crossfire antenna mount in the back. Important info about GPS! Mount it is made low profile so You'll need to unsolder bottom connectors and solder wires directly to GPS. Can also hold DJI O4 Pro…
- Downloads
- 95
- Likes
- 9
- Rating
- 0
P
PrintablesSebastianK
Matek wing fc mount
This is mount for matek wing fc - I have used on the H7 v2 but it should also work for the v3 and also for the f4 wing version. I use m2 screws to hold it in the wooden base and m3 to hold the lid on top of the fc
- Downloads
- 88
- Likes
- 4
- Rating
- 0
P
PrintablesMcFly
ImpulseRC Apex iFlight GPS Matek M8Q SMA Mount
printed with filamentum TPU Category: 3D Printing
- Downloads
- 88
- Likes
- 3
- Rating
- 0
P
PrintablesKarelVáňa
Mounting bracket for FC Matek F405-Wing V2
Simple FC mount with a locking tab. The holes for scrwe are 3mm
- Downloads
- 83
- Likes
- 9
- Rating
- 5
P
Printablesbornity
Matek mR900-30 mLRS Telemetry Module Protective Case
Print as oriented with no supports. Board will slide in. Small dab of hot glue can be used to retain if loose.
- Downloads
- 80
- Likes
- 0
- Rating
- 0
P
PrintablesFeday
Mateksys ELRS-R24-P6 case
This case protects your mateksys ELRS-R24-P6 receiver, and makes it easier to mount to your RC plane or car. There are two versions, one for straight pins that come with the receiver (I didn't test fit this because I use angled pins.)…
- Downloads
- 78
- Likes
- 8
- Rating
- 0
P
PrintablesCombinacijus
Nazgul V2 GPS Mount Matek M8Q-5883 Fusion360
GPS is hold by 2 tabs from the sides, it requires quite a lot of force to snap it in or out Version 2: Made it simpler to print and bowden printer by making print path more continuous It's more rigid GPS mount a bit tighter Print Settings…
- Downloads
- 76
- Likes
- 0
- Rating
- 0
P
Printablesgrabejud
AOS 3.5 v1 matek gps mount
aos 3.5 v1 with matek gps mounting. havent tested. print in tpu with support
- Downloads
- 76
- Likes
- 3
- Rating
- 0
P
PrintablesCryfer
Matka pro nejlepší matku ke dni matek. (Dárek ke dni matek)
Více než tisíc slov :D
- Downloads
- 70
- Likes
- 5
- Rating
- 5
P
PrintablesTestoMane
iFlight DC5 HD GPS Mount FPV MATEKSYS
Did not find an GPS holder which fits my needs so i designed a new one. I used TPU printing this, and double-sided tape on the bottom of the GPS module. Fixed with an ziptie, which also fixes the wires underneath. Its a MATEKSYS GPS &…
- Downloads
- 69
- Likes
- 4
- Rating
- 0
P
PrintablesMr-J
Matek ELRS-R24-V Case
This is a case for the Matek ELRS-R24-V PWM receiver. There are 2 versions, one with space for populating the UART2 pins, and a more compact one without. Category: R/C Vehicles
- Downloads
- 68
- Likes
- 7
- Rating
- 4.33
P
PrintablesJakub
Matek M8Q-5883 GPS 25x25 mount
Mounts 20x20 GPS with no mounting holes slided into housing, screwed in 25x25 2.5MM holes.
- Downloads
- 67
- Likes
- 3
- Rating
- 0
P
PrintablesRomik
Matek GPS M10-5883 to Flywoo Explorer mount
Simple Matek (http://www.mateksys.com/?portfolio=m10-5883) GPS module holder for Flywoo Explorer drone. After printing needs a bit of filing in order to tightly fit GPS module also it is capable to secure GPS with included heat shrink…
- Downloads
- 61
- Likes
- 1
- Rating
- 0
P
PrintablesEl Flecko
ZOHD Dart 250G FC + VTX Mount - Matek F411 WSE + Caddx Vista
I use a Matek F411 WSE and a Caddx Vista, and fly a 4s 850mAH battery in my ZOHD Dart 250g. I try some variants to put all together and get the CG in the right position, but nothing satisfied me. So i build a Mount for the FC and the…
- Downloads
- 58
- Likes
- 6
- Rating
- 0
P
PrintablesZŠ Klimkovice
3D SRDCE KE DNI MATEK
Děti upraví a vytisknou 3D srdce, které můžou darovat svým maminkám. V pracovní výchově ho dotvoří pomocí bavlnek a korálků.
- Downloads
- 57
- Likes
- 5
- Rating
- 5
P
Printablessamh
Matek Optical Flow mount for Rekon 7
Mount for a Matek Systems 3901-L0X Optical Flow and Lidar Rangefinder sensor to fit flush on the bottom of the Rekon 7 drone frame. The mount requires 2x M3x4 and 4x M2x8 fixings to assemble. Route the wires up through one of the holes in…
- Downloads
- 56
- Likes
- 0
- Rating
- 0
P
PrintablesDji Silesia
Matek mLRS reciever board holder
A very simple print - the reciever slides snugly inside, the ufl is slightly pressed from top so the antenna sits solid. Also a small cutout to access soldering points from the bottom if somebody needs it this way. Small cutout for USB-C.…
- Downloads
- 56
- Likes
- 1
- Rating
- 0
P
Printablesmaramao
Matek M8Q - 5883 GPS strap mount
merged two designs to produce a battery/Gopro strap mount for the Matek M8q gps or whatever other thing you would like to fit in a 20x20x10mm enclosure intended to use with a strap 2cm wide Print Settings Printer Brand: Creality Printer:…
- Downloads
- 55
- Likes
- 2
- Rating
- 0
P
PrintablesMilton Osorio
Matek Optical Flow & Lidar Sensor 3901-L0X 3901 PMW3901
Matek Optical Flow & Lidar Sensor 3901-L0X Housing (for FPV/INAV Drones) This is a custom housing designed for the Matek Optical Flow & Lidar Sensor 3901-L0X / PMW3901 module, created to mount securely under The Scout FPV drone (or any…
- Downloads
- 54
- Likes
- 2
- Rating
- 0
P
PrintablesTfaz
Matek 743 Flight Controller Mount
This was designed from some parts of two different existing models that were not precise enough for me. I did not list the remix as it is pieces of a few plus all original engineering by me, including the slant mount for the USB-Buzzer…
- Downloads
- 54
- Likes
- 4
- Rating
- 0
P
Printablesmorf
Matek VRX 1.2/1.3 GHz Airplane mount case
I'd browsed the internet but I haven't found a single case for Matek Video Receiver for 1.3/1.2 GHz. I designed it to be mounted sideways on the plane however feel free to remix it the way you like. I suggest to print using PETG, because…
- Downloads
- 50
- Likes
- 5
- Rating
- 0
P
PrintablesDji Silesia
Matek USB-C/Buzzer board holder
I created a small holder to keep my Matek USB-C/Buzzer extension board in my plane. Printed in PLA holds the board by some friction and uses the two holes in the board itself. Allows to plug USB-C directly but also the board can be easily…
- Downloads
- 46
- Likes
- 5
- Rating
- 0
P
Printablesdarken
FlyWoo Hexplorer/Explorer matek m8q-5883 GPS
GPS for a FlyWoo Hexplorer/Explorer, same position and mount as original, just allows you to mount a Matek M8Q-5883. Category: R/C Vehicles
- Downloads
- 45
- Likes
- 4
- Rating
- 0
P
Printablespaw3D
SpeedyBee Maser 5 v2 - Mateksys M10Q-5883 GPS Compass Mount Rear (20x20 mm)
Purpose This mount allows the Mateksys M10Q-5883 GPS & Compass module to be fastened to the Speedybee Master 5 v2 RC drone. It mounts the module to the drone's rear. Special care was taken to design the mount such that the module sits…
- Downloads
- 45
- Likes
- 2
- Rating
- 0
P
PrintablesiKOM
Align Trex 450 anti-rotation + Matek G474-Heli case (Rotorflight)
I have created this Align Trex 450 anti-rotation platform with integrated Matek G474-Heli case (Rotorflight). Let me know if you have any suggestions to improve my design or have any questions, let me know in the comments. Thanks :)…
- Downloads
- 44
- Likes
- 0
- Rating
- 0
P
PrintablesMr-J
Matek CRSF-PWM-C Receiver Case
I wanted an ExpressLRS receiver with more than 5 PWM servo channels, in a conventional receiver format for my larger fixed wing planes, so I built one using Matek's CRSF-PWM-C and ELRS-R24-D boards. To make the receiver to fit in this…
- Downloads
- 40
- Likes
- 5
- Rating
- 0
P
PrintablesWinkel
Dárek ke dni matek "Děkuji, maminko"
Tiskněte z PLA nebo jiného materiálu, při 2 perimetrech a 50% výplni. Velikost dekorace 120x120x2mm, velikost základny 135x30x3,5mm. Při montáži doporučuji použít vteřinové lepidlo. Design by Steinbauer3D
- Downloads
- 40
- Likes
- 1
- Rating
- 0
P
PrintablesFeday
Mateksys elrs-r24-v and crsf-pwm-v receiver case
A case for your mateksys elrs-r24-v receiver. Designed to fit this receiver but also fits crsf-pwm-v I redesigned the entire model, taking inspiration from this model , and made it fit a bit better. It also snaps closed.
- Downloads
- 39
- Likes
- 1
- Rating
- 0
P
PrintablesTfaz
Matek 743-WLITE Flight Controller Mount for HeeWing T1 Ranger
This is a multi-part remix with new additions of other FC Mounts. This should fit into the HeeWing Ranger T1 Nicely and mount the buzzer/USB board nicely behind the FC. I am still wanting to test fit with the PDB and will do that soon, i…
- Downloads
- 37
- Likes
- 3
- Rating
- 0
P
PrintablesMuad´Dib
Dárek ke dni matek
Projekt měl za cíl vytvořit dárek ke dni matek. V projektu se žáci naučili namodelovat jednoduchý model a poté ve výtvarné výchově model nabarvit.
- Downloads
- 36
- Likes
- 12
- Rating
- 0
P
PrintablesCJ Davies
Matek SAM-M8Q GPS mount
This is a basic mount for the Matek SAM-M8Q module, designed for one of my own frame designs but which might be a useful reference for other people working with the SAM-M8Q. This design uses M3 heat set inserts with a hole spacing of…
- Downloads
- 36
- Likes
- 0
- Rating
- 0
P
PrintablesJakub Klawiter
Queen bee catching tool / chwytak do matek pszczelich
What do you need is just a print (two of them) and a spring from original clothespin
- Downloads
- 35
- Likes
- 4
- Rating
- 0
P
PrintablesArberry21
Matek R24-P6 ELRS PWM receiver case
Adapted from jmxp69's design from thingiverse this case protects the board of the receiver and gives a flat surface on the rear for mounting within a model. Screw holes are sized for M3 screws and require tapping print the body of the…
- Downloads
- 35
- Likes
- 3
- Rating
- 1
P
Printablespaw3D
SpeedyBee Maser 5 v2 - Mateksys M10Q-5883 GPS Compass Mount Top (20x20 mm)
Purpose This mount allows the Mateksys M10Q-5883 GPS & Compass module to be fastened to the Speedybee Master 5 v2 RC drone. Instead of mounting the module to the drone's rear, the mount moves it to the front. The main purpose is to get…
- Downloads
- 34
- Likes
- 4
- Rating
- 0
P
Printablessamh
AtomRC Killer Whale - Matek Optical Flow/Lidar Sensor Mount
Landing gear alternative insert for the AtomRC Killer Whale that allows for flush mounting of the combined Matek Systems Optical Flow and Lidar sensor. As a fixed-wing, only the lidar is of use, so a hole for the lidar sensor is included…
- Downloads
- 33
- Likes
- 0
- Rating
- 0
P
PrintablesJakob G.
Case for Mateksys ELRS R24-P6V Receiver
I printed it with 0.16 mm Layer height. You may need to add a brim to prevent the pieces from falling over. Tolerances are pretty tight, but that should be no issue for any well-tuned printer.
- Downloads
- 31
- Likes
- 5
- Rating
- 0
P
PrintablesThomas
Matek SAM-M8Q Mounting Case
This a simple mounting case/cover for the Matek SAM-M8Q gps unit. Category: Electronics
- Downloads
- 31
- Likes
- 2
- Rating
- 0
P
PrintablesJantar
TBS Caipirinha 2 LED Mount for Matek 2812 LED Strip
Print on side for better stability. Print temperature: 220 Category: R/C Vehicles
- Downloads
- 26
- Likes
- 3
- Rating
- 0
P
PrintablesBass.Boi
Martian II vtx EWRF mount for frame with MatekSys H-LED
For Martian II frames, which have MatekSys H-LED with buzzer installed at the back. It ventilates, holds firmly in position, no possible shorts to GND. Print instructions Category: R/C Vehicles Print Settings Printer Brand: Prusa Printer:…
- Downloads
- 25
- Likes
- 0
- Rating
- 0
P
PrintablesItay Sharoni
Matek H743-WLITE Flight Controller Mount
Matek H743-WLITE FC Mount recommended material is PETG
- Downloads
- 24
- Likes
- 1
- Rating
- 0
P
PrintablesDavid
Matek WLITE series FPV flight controller plate for Sabre – 3D printed FPV plane.
This is a simple plate that will securely hold a Matek WLITE flight controller along with a receiver ziptied beneath it to save space/make wiring tidier. It is intended for Olivier C's 3D printed Sabre FPV plane.…
- Downloads
- 24
- Likes
- 0
- Rating
- 0
P
PrintablesDanO83
AR Wing matek f411 wing + ublox m8n mount
AR Wing matek f411 wing + ublox m8n mount Use some m3 standoffs for the gps mount (I used 20mm standoffs), then glue the base to the foam. You could use the m2 screws that come with the matek fc to fasten it, I used some longer ones. The…
- Downloads
- 23
- Likes
- 2
- Rating
- 0
P
PrintablesAndys1957
Box für Hanmatek SF1 Stud Finder
Dies ist eine Aufbewahrungsbox für einen Hanmatek SF1 Stud Finder (Leitungssuchgerät). Es ist Platz für das Gerät und eine Batterie. Der Deckel wird eingeschoben und über 4 Magnete (D3 x 2mm) gehalten. Die Box wurde mit FreeCAD 0.22.0dev…
- Downloads
- 23
- Likes
- 1
- Rating
- 0
P
PrintablesSenelyzas44
SpeedyBee Bee35 Matek Lidar holder
Print in TPU with organic supports and with little infil. Fits original screws. A little piece of 3M tape can be put to prevent Matek board from moving.
- Downloads
- 22
- Likes
- 2
- Rating
- 0
P
PrintablesJakob G.
Improved Case for Mateksys R24-P6 Receiver
I printed it with 0.16 mm Layer height. No supports needed. You may need to add a brim to prevent the pieces from falling over.
- Downloads
- 22
- Likes
- 3
- Rating
- 0
P
Printablestfmccull
Matek H743 Lite FC mount
mount for the Matek H743 Lite flight controller. Secure, but easy to remove. Category: R/C Vehicles
- Downloads
- 22
- Likes
- 0
- Rating
- 0
P
PrintablesRuedli
MATEK ELRS R24 Vario case
Just added some height to the sides and the lid, as well as a hole for channel 8. Need the fuison 360 or step files to do a better job.
- Downloads
- 22
- Likes
- 2
- Rating
- 0
P
PrintablesTrailerParkPilot
Matek F411-WTE With GPS Mount
This is a modified mount to fit the Matek F411-WTE and a GPS of your choice in cramped airframes where real estate is a premium. The mount was printed using Inland PLA+ at 18% infill. This gives it a final mass of around 6g. You can…
- Downloads
- 22
- Likes
- 1
- Rating
- 0
P
PrintablesFaquaral
Heewing T2 rear GPS pole (Matek M10Q-5883)
A pole to move a Matek M10Q-5883 GNSS/compass away from interferences Install in the rear gps compartment of the Heewing T2 Cruza Designed in two part so that the pole can be unscrewed for transport Print with some support You will need…
- Downloads
- 21
- Likes
- 0
- Rating
- 0
P
PrintablesStonyTark
Matek M9N-5883 Titan XL5 mount
A shorter mount than the original designs I remixed from for the Matek M9N-5883 GPS module that I am using for my iFlight Nazgul5 V2 but should fit other XL5 models. Category: R/C Vehicles
- Downloads
- 21
- Likes
- 1
- Rating
- 0
P
PrintablesJan
Holder Matek 405 wte
I couldn't find a suitable holder for this fc. printed from PLA 15% infill, 3 layers
- Downloads
- 20
- Likes
- 0
- Rating
- 0
P
Printablescaptainnadi
Heewing T2 C20T Gimball DJI O4 Pro and Matek Airspeed Sensor
Hi all! Here is my remix of another design posted here on Thingiverse. Made the mount compatible with the DJI O4 Pro, which bolts on the rear, and a 5V fan bolted on the front. The C20T gimbal sets as previously designed, with an airspeed…
- Downloads
- 20
- Likes
- 0
- Rating
- 0
P
PrintablesJakob G.
Case for Mateksys ELRS-R24-V Receiver
I printed it with 0.16 mm Layer height. You may need to add a brim to prevent the pieces from falling over. Tolerances are pretty tight, but that should be no issue for any well-tuned printer.
- Downloads
- 19
- Likes
- 5
- Rating
- 0
P
Printablesshangaoren
Matek GPS M10Q Holder
M10Q Gps holder with 33x15mm mount designed for 2mm self taping screws
- Downloads
- 19
- Likes
- 0
- Rating
- 0
P
Printablescmot
R-XSR Receiver Stack Mount (for matek VTX-HV)
This is a little mount for the R-XSR receiver from FrSky. It is designed to be next to a Matek VTX-HV and has a small spot for a zip tie to secure the VTX antenna pigtail. It doesn't have to be used with the Matek VTX however. Print…
- Downloads
- 19
- Likes
- 1
- Rating
- 0
P
PrintablesJoLo
Přípravek na značení včelích matek / A marker for labeling queen bees
pomocník při značení včelích matek, nutné dodat 1cm molitan/assistant for marking bee queens, necessary to provide 1cm foam
- Downloads
- 18
- Likes
- 2
- Rating
- 0
P
Printablesskribidool
Mateksys 3901-L0X 30x3mm mount for GEP-LC75-V3
Mounting case for matek optical flow and lidar sensor with 30x3mm bolt pattern. Fits GEPRC GEP-LC75-V3 or any 30mm mount. These things are made to pretty shoddy tolerances so I provided the files if you need to nudge the loft for the…
- Downloads
- 18
- Likes
- 1
- Rating
- 0
P
PrintablesStonyTark
Matek M9N-5883 Titan XL5 mount with VTX
Replacement part for adding GPS to the Nazgul5 adapted for the Matek GPS M9N-5883 Category: R/C Vehicles
- Downloads
- 18
- Likes
- 1
- Rating
- 0
P
Printablesmunzli
matek F411-WSE, M8Q-5883 and VTX-HV 30x30 mount
a 30x30 mount for a matek F411-WSE flight controller, a M8Q-5883 gps module and a VTX-HV video transmitter. fits into the sonicmodell mini ar wing. heavily remixed from https://www.thingiverse.com/thing:4438702
- Downloads
- 18
- Likes
- 0
- Rating
- 0
P
PrintablesYuri Rage
ShenDrones TerraPlane Matek GPS Stalk
This stalk mounts opposite the VTX antenna and is sized for the Matek M8Q-5883 GPS/Compass module. It is hollow so that wires can pass through. I used 3M mounting tape to affix the module on top. Printed without support in PETG. The v2…
- Downloads
- 18
- Likes
- 0
- Rating
- 0
P
PrintablesKiloxTango
Matek Systems GPS Riser. RC Plane/Rotor
Simple model to secure and rise a MatekSYS M8Q-5883 GPS module. Printing: .2-layer height, no supports, PET-G for riser Tray: default .2mm settings seem to work well Riser: increase infill to 25-50% I used 25% gyroid with good results.…
- Downloads
- 18
- Likes
- 5
- Rating
- 0
P
PrintablesJeroen_dereus
Matek f405 WMO Mount
Matek f405 WMO Mount use some hot glue to fully lock in the fc
- Downloads
- 16
- Likes
- 0
- Rating
- 0
P
PrintablesMilan-Trcka-Praha
Den MATEK 2024
Použil jsem 2 barvy pro výsledný vzhled.
- Downloads
- 16
- Likes
- 2
- Rating
- 0
P
PrintablesMegaMaterixer
Kayouflip cap und Matek buzzer holder
ein einfacher cap und matek buzzer holder. er wird einfach auf die standoffs gesteckt.
- Downloads
- 15
- Likes
- 1
- Rating
- 0
P
Printablescmenard
24x24 FC mount for Matek F411 Wing
This mount is intended to glue into your aircraft and allow mounting of the Matek F411 Wing flight controller. Category: Models
- Downloads
- 14
- Likes
- 1
- Rating
- 0
P
PrintablesBoopidoo
Matek MLRS Nano/Lite Enclosure
This is a complementary cover for the Matek MLRS Tx to be used with a TBS Lite/Nano rear part. Could probably easily be fitted to other Nano/Lite intefaces but I had a few spare ones for TBS crossfire so that's what I used. :) Printed…
- Downloads
- 14
- Likes
- 2
- Rating
- 0
P
PrintablesMeiming
GPS Matek M8Q-5883 holder for Rotorama Calypso
Modelováno a tisknuto pro kamaráda z TPU.
- Downloads
- 14
- Likes
- 2
- Rating
- 0
P
Printablessidjej
S800 Reptile Matek F411-Wing Mount
I made this mounting plate to properly center a Matek F411-Wing FC in the Reptile S800. The FC guides are a pretty tight fit, which enables you to to just clip the FC in there. I still used a bit of double sided tape. I used CA Glue to…
- Downloads
- 13
- Likes
- 0
- Rating
- 0
P
PrintablesRGBskills
Matek VTX Antenna mount
The matek VTX is a grate VTX to this day but the antenna mount can sometimes disconnect this model fixes that.
- Downloads
- 12
- Likes
- 1
- Rating
- 0
P
PrintablesNathanMichaelMoore
Matek LED Board Mount for 250 quad
This is an LED mount for the Matek Systems 7 Colors RGB LED board, I got them off of Amazon .It is used with the Usmile 250 quad also found on Amazon but should work with any quad that has the bars spaced around 31.5mm. LEDs:…
- Downloads
- 11
- Likes
- 0
- Rating
- 0
P
PrintablesChris
Matek mLRS Nano Module
This uses a Matek mLRS receiver module (mR900-30) with transmitter firmware installed and an ESP8266 (ESP-01) to serve as a backpack. Photos show it connected to a Radiomaster AX12. I've tested it but not long enough to get hot yet. It…
- Downloads
- 11
- Likes
- 1
- Rating
- 0
P
Printablessidjej
iFlight ih3 longrange tail drotek dp0401 or matek SAM-M8Q
I am trying to create a sub250gr 3-inch drone that is capable to capture nice long/mid-range HD footage. Good positioning of all antennas of the system, being video transmission, control link and GPS, is crucial to getting the confidence…
- Downloads
- 11
- Likes
- 0
- Rating
- 0
P
PrintablesMegaMaterixer
Kayouflip Seiten abdeckung ink cap und Matek buzzer holder
Kayouflip Seiten abdeckung ink cap und Matek buzzer holder es wird eifach auf die standoffs gesteckt. es schützt vor staub und dreck im Innenraum ihres copters
- Downloads
- 11
- Likes
- 2
- Rating
- 0
P
PrintablesZŠ Brušperk
Hrníček ke dni matek
Žáci vytvořil hrníček ke dni matek, sloužící jako ozdoba. Není vhodný ke konzumaci nápojů. Materiál: PLA Výplň: 15% Organické podpěry
- Downloads
- 10
- Likes
- 2
- Rating
- 0
P
PrintablesJDtisk3D
Matka ke dni Matek text doplňte
Matka ke dni Matek text doplňte
- Downloads
- 9
- Likes
- 1
- Rating
- 0
P
PrintablesNikaNinja
mateksys buzzer x bee35 mount
Mount for Mateksys loud buzzer , just behind the camera. print with any material. Any feedback is appreciated!
- Downloads
- 8
- Likes
- 0
- Rating
- 0
P
PrintablesMilesy
Hildagard 395 V6 GPS Mount for Matek M8Q-5883
A mount for the Matek M8Q-5883 which uses the sma Mount Category: R/C Vehicles
- Downloads
- 8
- Likes
- 0
- Rating
- 0
P
Printablescblackburn1099
Raphax Matek Wing Rear Mount
Rear equipment bay mount plate for a Matek Wing FC in a Stealthwings raphax. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: 200 Infill: 100 Filament: overture PETG-Pro Grey Notes: Doesnt have to…
- Downloads
- 6
- Likes
- 0
- Rating
- 0
P
PrintablesVolodymyr Boryslavskyi
Flightory - Super Stingray VTOL - FC Mateksys F405 and ESC 4in1 mount board
Mount board for Mateksys F405 Wing V2 and ESC 4in1 including GPS, elrs and antenna mounts.
- Downloads
- 5
- Likes
- 0
- Rating
- 0
P
PrintablesLukas
Xigmatek LED Cover
The presented model was designed for Xigmatek Mini-ITX PC case with the part number CCD-02ABX-U01 ( link ). The design of the original LED cover allows for the installation of GPU's with maximum length of 200 mm. The attached modified LED…
- Downloads
- 5
- Likes
- 0
- Rating
- 0
P
PrintablesCédric Sueur
Support de vitre latéral Ximatek Zeus
Si comme moi vous avez perdu les joins de support de vitre latéral de votre boitier Ximatek Zeus
- Downloads
- 3
- Likes
- 0
- Rating
- 0
P
PrintablesSponge
TBS Caipirinha II Furious F35 Mount Matek 405 mini
2 Mounts for F35 and Matek 405 mini Category: R/C Vehicles
- Downloads
- 2
- Likes
- 0
- Rating
- 0