1 / 3
Matek Systems GPS Riser. RC Plane/Rotor
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Lift the GPS module 2.5" off mounting plate to minimize interruptions.
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 18
- Makes
- 0
- Views
- 366
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution — Noncommercial
Simple model to secure and rise a MatekSYS M8Q-5883 GPS module.
Printing: .2-layer height, no supports, PET-G for riser
Tray: default .2mm settings seem to work well
Riser: increase infill to 25-50% I used 25% gyroid with good results.
Install: install GPS module into tray so both connections are accessible. Secure in place with hot glue.
Install the riser onto the body, screw holes are for M4 and spaced 20mm apart. add hot glue to the hole on the bottom of the tray and quickly push the tray down on the riser and align.