Counting matching models…
All 78 Cards converted to .stl files. unchanged they measure 37x65x1mm with 5min/2gram for 1 card all together the stack should stand at 8cm high. Use your cards wherever you want since they are waterproof when made from plastic :) The…
PLEASE SHARE ON SOCIAL AND LEAVE A LIKE IF YOU DOWNLOAD. We provide high quality, presupported, miniatures for 3d printing. Easy Print, Easy Paint Checkout all our printable miniatures on:…
Customized version of https://www.thingiverse.com/thing:3067408 Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing\_id=3067408 Instructions Using the following options: type = both CARD_SIZE_LONG_EDGE = 90…
Tarot card "Three of Swords" to hang up. For a look into your future.
Tarot card "The Moon" to hang up. For a look into your future.
Another model rip from Monster Hunter: World All design and copyright belong to CAPCOM Category: Creatures
Tarot card "The Ace of Swords" to hang up. For a look into your future.
print with 100% infill, 40 mm print speed , 0.16 layer height
Print it in high quality for nice.
A simple box with and I added a cutout lid. I wanted to keep my wife's Tarot in good condition. TLDR --- This would work with many decks I would imagine. 124mm x 74mm x 32mm inner clearance. The lid and box are in the same file but many…
This tarot card holder supports 3 cards for a tarot reading or display. The New Moon slot also works nicely with a crystal inside, as displayed in the picture. In my case, I didn't have an AMS, so I paused instead on layer 18, and…
Customized version of my undivided gridfinity boxes that adds a small amount of space for tarot cards. The original 1x3 gridfinity box is just barely too small internally due to the socket, so I slightly adjusted a non-critical socket…
Card box meant to store Tarot Cards 3 top cover designs no supports needed - top slides in I was able to print this with wood PLA and still have the top functionally slide in
Tarot Card Stand Useful for your daily single or double draw. The front compartment holds precious stones. Three stars on the front and a single sword on each end. Designed on Tinkercad. One object to print. “For support enforcers only” -…
A lithopane of the Fool tarot card. Uses art from PublicDomainVectors.org . Mesh created using the ItsLitho service.
Caja para mazo de cartas de tarot con mecanismo de traba en su tapa. Ajustes de impresión: Altura de capa: 0.12mm Temperatura PLA: 200°C Temperatura Cama: 60°C Soportes: Árbol Tarot card deck box with a locking mechanism on the lid. Print…
intended to be used with the Pico Tarot ( https://ko-fi.com/s/451822b8ae ) the holes were a bit of a tight fit for me, so depending on your needle you may want to scale up a percent or two
The shell insect neopteran Altaroth are “ Insects that widely inhabit many areas. They absorb fruit, mushrooms, and honey, and then carry them back to their nest. Materials can thus be collected from their swollen abdomens, whose color is…
A lithopane of the Hermit tarot card. Uses art from PublicDomainVectors.org . Mesh created using the ItsLitho service.
A lithopane of the Magician tarot card. Uses art from PublicDomainVectors.org . Mesh created using the ItsLitho service.
Card holder I designed for my wife to display her cards. It's a good width for most cards, and since the sides are open, it will also hold wider/larger cards too. Fusion file included if you would like to modify the design. Recommend…
Most of parts are printed with soft TPU Top plate must be printer with strong and durable filament (ABS CF, ABS GF, PETG CF etc.) Not for ruzzke
A lithopane of the High Priestess tarot card. Uses art from PublicDomainVectors.org . Mesh created using the ItsLitho service.
Modified the deck holder in Tinkercad. Thickened side walls, sized to fit sleeved tarot decks. Embossed deck names. Too big to fit inside the game’s box, but sleeved cards all fit back in box. Print Settings Printer: Artillery Sidewinder…
Boite pour jeu de Tarot pour cartes classiques en dimension 63mm x 113mm. Imprimée avec support pour avoir un rendu net sur le couvercle.
A lithopane of the Magician tarot card. Uses art from PublicDomainVectors.org . Mesh created using the ItsLitho service.
I am not sure what cards other people are making boxes for, but I have a really old set of Rider-Waite tarot cards I wanted a nice tight-fitting box for because the sleeve is falling apart, so I borrowed this very nice design and…
Overview A full set of 22 Tarot Bookmarks featuring all Major Arcana designs, created as Hueforge-style black & white prints. Each bookmark is slim, sturdy, and ideal for books, journals, and gifting. Designed for high detail and clean…
Generated litho from https://lithophanemaker.com/Framed%20Lithophane.html. Frame Options: Frame Only Lithophane Resolution: 0.2 Base Length: 100 Base Width: 7.5 Base Height: 7.5 Overhang Angle: 60 Maximum Thickness: 3.0 Minimum Thickness:…
Description Generated litho from https://lithophanemaker.com/Framed%20Lithophane.html Frame Options: Frame Only Lithophane Resolution: 0.2 Base Length: 100 Base Width: 7.5 Base Height: 7.5 Overhang Angle: 60 Maximum Thickness: 2.8 Minimum…
Size(mm): 140 x 90 x 60 Remixed from https://makerworld.com/pt/models/463688-customizable-box-with-lid Card from https://www.printables.com/model/1037892-all-78-tarot-cards-rider-waite-smith-full-deck Print Settings Printer Brand:…
Bring a touch of mystique to your space with this enchanting model of a witch's hand gracefully holding a tarot card. The hand features intricate detailing, from the ornate wrist design to the slender, elegant fingers. The card displays…
Introducing a custom 3D model designed exclusively for the Tarot 650 series quadcopters! This ESC (Electronic Speed Controller) protective mount is engineered to provide maximum protection, secure mounting, and efficient cooling for your…
Generated litho from https://lithophanemaker.com/Framed%20Lithophane.html Frame Options: Frame Only Lithophane Resolution: 0.2 Base Length: 100 Base Width: 7.5 Base Height: 7.5 Overhang Angle: 60 Maximum Thickness: 2.8 Minimum Thickness:…
A lithopane of the Temperance tarot card. Uses art from PublicDomainVectors.org . Mesh created using the ItsLitho service.
Plate for gluing the PixHawk 5x/6x flight controller on the Tarot 650 Sport frame. The plate is attached to the original frame bolts.
A lithopane of the Emporer tarot card. Uses art from PublicDomainVectors.org . Mesh created using the ItsLitho service.
This beautifully crafted tarot box showcases a mystical design that captures the essence of the tarot experience. Its ornate detailing features celestial elements like a crescent moon and stars, framed by elegant arches and adorned with…
This is a cardholder for up to 3 decks of sleeved tarot cards. They fit loosely inside the holder so they can be removed easily, but will not slide out or get knocked over as easily as just a pile. Fits sleeved cards that are 72 x 122 mm…
A lithopane of the Hierophant tarot card. Uses art from PublicDomainVectors.org . Mesh created using the ItsLitho service.
ESC cover for 16MM Motor Mount for Multicopter TL68B19 TL68B20 For version with capacitor see this model .
A fun "Tarot & Chill" text sign. Great for anyone who loves a bit of cheeky witchy humor! I scale them up to about 20mm high and 2.5mm thick.
Generated litho from https://lithophanemaker.com/Framed%20Lithophane.html Frame Options: Frame Only Lithophane Resolution: 0.2 Base Length: 100 Base Width: 7.5 Base Height: 7.5 Overhang Angle: 60 Maximum Thickness: 2.8 Minimum Thickness:…
Step into the sacred temple of intuition and mystery with this faithful 3D recreation of the Boaz and Jachin Columns from the High Priestess Tarot card. Symbolizing balance, duality, and the gateway to hidden knowledge, these iconic…
Project: 3 of swords.hfp Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 92.98x141.52mm in size You may print at higher layer heights below the Base Thickness of 0.48mm The Max allowed Thickness…
3-axis gimbal for GoPro cameras, meant to be attached on standard mounts of Tarot 680Pro hexacopter. However it should fit to many other multicopters. I use it with STorM32 BGC gimbal controller and Quanum 2208 stepper motors. Even if…
Futuristic Tarot-Inspired Soap Dish Tray Elevate your bathroom décor with this sleek and modern soap dish tray, blending futuristic design with mystical Tarot influences. Inspired by The Moon card, the piece features an elegant motif of…
Project: the devil.hfp Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 137.26x238.53mm in size You may print at higher layer heights below the Base Thickness of 0.48mm The Max allowed Thickness…
The original paper box is gradually falling apart after years of use. This replacement box has a custom size specific to the Egorov cards, and the lid features the golden birds ornamentation found on the card backs and on the old paper…
ESC cover for 16MM Motor Mount for Multicopter TL68B19 TL68B20 with enough space for capacitor (e.g. Tarot AIR 20A). For version without capacitor see this model .
Here is a landing gear for the tarot 250 or any other small quadcopter with a weight around 400-600 grams. it will save you some weight compared to the stock landing gear. Use the shell version unless you have a 3d-printer that supports…
The Ace of Cups represents emotional renewal, spiritual abundance, and boundless creativity. Now, you can bring this energy into the physical realm with this intricate 3D-printed design. Inspired by the rich symbolism of traditional…
Boite de jeu de carte pour un jeu de Tarot classique avec sabot
Project: the hermit.hfp Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 178.38x324.32mm in size You may print at higher layer heights below the Base Thickness of 0.48mm The Max allowed Thickness…
This card desk is designed based on common oracle card size that can fit most of card desk on marketplace . The design features 6 pins to stack multiple desks And a small angle slope for easy handle Note: the model should be rotate 90…
A simple file for taking out a Tarot 690 Hex middle plate and placing a 30x30 or 20x20 flight controller/esc. Mounts using 45x45 holes Print in material of choice, I used Rose PETG from California Filament
A way to mount the Tarot RC GoPro brushless gimbal to a DJI F450 Flamewheel http://www.tarot-rc.com/index.php?main_page=product_info&cPath=65_96&products_id=1029 Instructions Printed with ABS The standoffs from the gimbal does snap in…
This replacement gimbal clamp for the Tarot T-2D brushless gimbal allows a lens protector to be installed on the camera. The aluminum clamp that comes with the gimbal holds the camera securely, but it does not allow a standard GoPro lens…
This is an adapter to mount the TAROT small electric landing gear TL65B44 to the 680PRO frame. You will need 4x30mm M2.5 screws and 4xM2.5 nuts per side to mount it to the frame. Additionally you can add 2 more M2 screws to fixate the…
UPDATE: I just received a new ZMR frame and noticed that the pillars was 2.5mm taller than the once I had before. I redesigned the mount and uploaded a new .STL-file named LONGERPILLERS in the end for the taller once.. UPDATE: Final…
This is a tarot card box for small tarot cards to keep them clean or simply to protect them better. Photos will come when printing is done. Let me know if the model is incorrect Please use for the Top Supports i use PLA infill 20
Wanted a travel box for this cool little game, holds the cards and tokens, NOT SLEEVED. When we go to conventions we usually bring dice already, so had no need for the box this game comes in. Obviously will not hold the manual. I am not…
Trophée concours tarot Imprimer le tout en PLA, sans supports. Peindre l'ensemble puis coller les cartes imprimées sur papier ordinaire avec de la colle à bois. Vernir le tout quand tout est sec.
Protege tu mazo del Grand Etteilla (Lo Scarabeo) con esta caja de ingeniería avanzada diseñada específicamente para la velocidad y precisión de impresoras modernas como la Ender 3 V3 KE. Olvídate de las cajas que se abren solas en la…
Description française Boîte coulissante minimaliste conçue pour ranger un jeu de cartes de tarot au format classique. Le modèle se compose de deux parties : une boîte principale et un couvercle coulissant. Il est prévu pour être imprimé…
This was made for a friend who wanted to keep out there daily card pull to look at daily on their desk
This is a mod of the tarot 250 frame. my setup: Naze32 OrangeRx DSMX 3Ch S.BUS 2.4Ghz Rx (twin long antenna version) Gemfan 5040 Multirotor Propellers Multistar Elite 2204-2300KV Afro ESC 12Amp OPTO Ultra Lite Multi-rotor Motor Speed…
boite pour jeux de tarot imprimée avec une K1 pas de support
I created the box in TinkerCad and uploaded the triple moon as an SVG file, then placed it on the box.
A compact base for the Tarot T-2D Gimbal to moint it to a TC-R 220 or a QAV-R. There is no place to mount the controller yet, so you have to find a way how to mount yours. I screwed a small plate to the top plate to which I zip tied the…
Tarot130 motor bumper. Must be printed with flexible filaments otherwise it will be impossible to mount! I used Filaflex @240°C, fan 100% Layers: 100um Weight: 6gr all 4 pieces, 30% infill Print Settings Printer: Hephestos2 Rafts: No…
Sorry! its been a while since i made a model well that's because ive been designing models on another website for sale called cults3d, my username is pretty similar but instead of Evas3Dreptiles its Evas3Ddragons. I had quit mhw for a few…
A unique 3D printable creation — this Stand To Display Single Tarot Card, Moon And Stars Design, Angled Display Tested on 8+ FDM printers. Download and print immediately. **What's Included:** - STL File - 3MF File - OBJ File - Print Guide…
One issue with the Tarot 280 quad frame is that the power distribution board is open and on the bottom of the frame where it may get damaged so ive designed this printable cover. There are 2 versions the standard version requires 4 nos…
I'm addicted to Boardgame Barrio's system for putting small board games into standardized boxes those being the cheap photo caddys you can get from any craft store. I had this awkward travel tarot set called Tarot to Go. it came in this…
This is Astaroth's Axe (Kulutues) from the Soul Calibur video game series (copyright Bandai Namco). Category: Props
2 Versions Version 1 was designs for a 4mm channel that we had in the wall as shown in the pictures. Version 2 was designed for with 2 shelf brackets to hold up the small shelf. Print with the Wall side down on the shelf. Standard drywall…
Phone Holder for taranis X9D with a TAROT hook print 3 walls everywhere, and use 35% infill, gyroid is prefrered, no supports
Minimalistic mount for a 6mm SMA female connector on a Tarot 650.
This is a remix for a file that was meant to be used on a separate cardboard box. I prefer to keep everything in the same box to reduce confusion on a shelf but the original does not fit without damaging or changing the current dividers.…
Overview A full set of 22 Tarot Bookmarks featuring all Major Arcana designs, created as Hueforge-style black & white prints. Each bookmark is slim, sturdy, and ideal for books, journals, and gifting. Designed for high detail and clean…
2 Versions Version 1 was designs for a 4mm channel that we had in the wall as shown in the pictures. Version 2 was designed for with 2 shelf brackets to hold up the small shelf. Print with the Wall side down on the shelf. Standard drywall…
This file-set includes a rolling tray, dice slots, and a dice itself to print. The dice slots themselves can hold 15mm x 15mm dice. You can connect the rolling tray and dice tray together with the additional printable pegs. Print 2 of…
Project: the loversnew.hfp Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 176.01x256.08mm in size You may print at higher layer heights below the Base Thickness of 0.48mm The Max allowed…
Project: hanged again.hfp Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 216.72x317.54mm in size You may print at higher layer heights below the Base Thickness of 0.48mm The Max allowed…
Forty days and nights were not enough to drown him. The chains of the abyss were not enough to bind him. The prayers of men were not enough to erase him. 🌑 From the Menorcan Gate of Ashen Grace, the sea delivers its warlord— Aztaroth del…
These parts were designed for the Tarot XS690 Quadcopter Carbon Frame with 16mm diameter arms. The LED holder is designed around the Quanum Quadcopter and Hex Navigation LED Light System from Hobby King and should work with the 6-Axis…
A lithopane of the Devil tarot card. Uses art from PublicDomainVectors.org . Mesh created using the ItsLitho service.
A lithopane of the Lovers tarot card. Uses art from PublicDomainVectors.org . Mesh created using the ItsLitho service.
This is an upgrade of: http://www.thingiverse.com/thing:1533058 I add the hole to block the motor holder on the arm, to avoid rotations. Category: R/C Vehicles
This is a Lipo Battery Tester holder suitable for Tarot model FY650, FY680, FY690S with 16mm arms diameter. You can fix the battery tester at the holder with a zip tie. The battery tester model is:…
