ZMR 250 Tarot 600tvl 20degree cam mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
UPDATE: I just received a new ZMR frame and noticed that the pillars was 2.5mm taller than the once I had before.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 17
- Makes
- 0
- Views
- 173
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution — Share Alike
UPDATE: I just received a new ZMR frame and noticed that the pillars was 2.5mm taller than the once I had before. I redesigned the mount and uploaded a new .STL-file named LONGERPILLERS in the end for the taller once..
UPDATE: Final version v.3, mounted and tested, works great.
Fits the Tarot 12v 600tvl camera:
http://www.banggood.com/Tarot-12V-600TVL-120-2\_8mm-FPV-Camera-TL300M-For-RC-Quadcopters-p-962828.html
Snug fit (perfect fit)..
Camera will be protected if crashing, its behind the edges of the frame.
Note: The mount on the "real" pictures is v.1, the cable is now mounted to the left to get the correct angle of picture.
Print instructions
Category: R/C Vehicles Summary
UPDATE: I just received a new ZMR frame and noticed that the pillars was 2.5mm taller than the once I had before. I redesigned the mount and uploaded a new .STL-file named LONGERPILLERS in the end for the taller once..
UPDATE: Final version v.3, mounted and tested, works great.
Fits the Tarot 12v 600tvl camera:
http://www.banggood.com/Tarot-12V-600TVL-120-2\_8mm-FPV-Camera-TL300M-For-RC-Quadcopters-p-962828.html
Snug fit (perfect fit)..
Camera will be protected if crashing, its behind the edges of the frame.
Note: The mount on the "real" pictures is v.1, the cable is now mounted to the left to get the correct angle of picture.
Print Settings
Rafts: No
Supports: Yes
Resolution: ,1
Infill: 20%
Notes:
Flat down. The support will be for the hole.