8 models
IMPORTANT: You need to add this to Line 20 of the G-code: M302 S85 This allows the Printer to do the Cold Pull. Be aware, that this is normally deactivated due to Security, since a Cold pull is pretty hard on the Printer, and should only…
Print approx. €0.06–€0.07 excl. taxPreliminary estimate for one variant
I was quite surprised how few of this 120 degrees connectors is available to download, for 3030 it was none, so here one is :) I printed it from pla (as i think it is not that bendable as petg), 0,25 structural, 5 perimeters 5 top and…
Print approx. €0.64–€0.78 excl. taxPreliminary estimate for one variant
The iFlight baby Nazgul (both 63 and 73) has a very aggressive camera angle, around 40 degree. I designed a lower angle for this drone which should be closer to 25 degree. It fit both drones.
UPDATE: I just received a new ZMR frame and noticed that the pillars was 2.5mm taller than the once I had before. I redesigned the mount and uploaded a new .STL-file named LONGERPILLERS in the end for the taller once.. UPDATE: Final…
No supports needed. I printed with PLA+
I recommend printing the one file given or use supports. This model REQUIRES plastic coated wires for their stiffness. Silicone wires are to pliable and don't preform well. Install servo, turn on servo and go to max and install the gear…
These are 2 Adapters for connecting BlenderBottle ProStak Shakers or Extensions with 720Dregree Shakers and Extensions and and vice versa. Print Option: PLA 100% Infill If you have any questions, feel free to ask.
I recommend printing the one file given or use supports. This model REQUIRES plastic coated wires for their stiffness. Silicone wires are to pliable and don't preform well. Install servo, turn on servo and go to max and install the gear…
