ZMR 250 Tarot 600tvl 20degree cam mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
UPDATE: I just received a new ZMR frame and noticed that the pillars was 2.5mm taller than the once I had before.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 17
- Wydruki
- 0
- Wyświetlenia
- 173
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Share Alike
UPDATE: I just received a new ZMR frame and noticed that the pillars was 2.5mm taller than the once I had before. I redesigned the mount and uploaded a new .STL-file named LONGERPILLERS in the end for the taller once..
UPDATE: Final version v.3, mounted and tested, works great.
Fits the Tarot 12v 600tvl camera:
http://www.banggood.com/Tarot-12V-600TVL-120-2\_8mm-FPV-Camera-TL300M-For-RC-Quadcopters-p-962828.html
Snug fit (perfect fit)..
Camera will be protected if crashing, its behind the edges of the frame.
Note: The mount on the "real" pictures is v.1, the cable is now mounted to the left to get the correct angle of picture.
Print instructions
Category: R/C Vehicles Summary
UPDATE: I just received a new ZMR frame and noticed that the pillars was 2.5mm taller than the once I had before. I redesigned the mount and uploaded a new .STL-file named LONGERPILLERS in the end for the taller once..
UPDATE: Final version v.3, mounted and tested, works great.
Fits the Tarot 12v 600tvl camera:
http://www.banggood.com/Tarot-12V-600TVL-120-2\_8mm-FPV-Camera-TL300M-For-RC-Quadcopters-p-962828.html
Snug fit (perfect fit)..
Camera will be protected if crashing, its behind the edges of the frame.
Note: The mount on the "real" pictures is v.1, the cable is now mounted to the left to get the correct angle of picture.
Print Settings
Rafts: No
Supports: Yes
Resolution: ,1
Infill: 20%
Notes:
Flat down. The support will be for the hole.