Experimental Phantasm Parts
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Experimental parts for the Phantasm dart blaster by gifd.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 15
- Wydruki
- 1
- Wyświetlenia
- 152
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Flywheel designed to fit Xing 2207 motors. Might also be compatible with T19/Spirit.
Requires good layer & line adhesion to print properly.
Ensure your process can print steep overhangs. (Otherwise wheels will be very unbalanced.) I use 0.24 layer height, 0.48 line width, and 2 walls, 3 top/bottom layers. Concentric patterns w/o infill. Use ABS or other lightweight high temp filaments only.
Not extensively tested in the field yet, has only fired a few darts on a test bench setup. Unknown if the geometry conflicts with the cage.
Firmware contains my adaptations to the hardware I have.
06/17/2025: New updated version has been added, adjusted for weight reduction.
06/18/2025: Modifying this listing to be for all Phantasm edits I do.