Experimental Phantasm Parts
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Experimental parts for the Phantasm dart blaster by gifd.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 15
- Makes
- 1
- Views
- 152
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Mechanical Parts
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Flywheel designed to fit Xing 2207 motors. Might also be compatible with T19/Spirit.
Requires good layer & line adhesion to print properly.
Ensure your process can print steep overhangs. (Otherwise wheels will be very unbalanced.) I use 0.24 layer height, 0.48 line width, and 2 walls, 3 top/bottom layers. Concentric patterns w/o infill. Use ABS or other lightweight high temp filaments only.
Not extensively tested in the field yet, has only fired a few darts on a test bench setup. Unknown if the geometry conflicts with the cage.
Firmware contains my adaptations to the hardware I have.
06/17/2025: New updated version has been added, adjusted for weight reduction.
06/18/2025: Modifying this listing to be for all Phantasm edits I do.