1 / 1
SwingArm with CPAP hose for 20mm aluminum extrusion — zdjęcie 1

SwingArm with CPAP hose for 20mm aluminum extrusion

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Low drag SwingArm for 20mm aluminum extrusion and a channel for a CPAP hose

Ocena
0 / 5
Polubienia
14
Pobrania
24
Wydruki
0
Wyświetlenia
262
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
GNU Lesser General Public License

Inspired by Prusa's SwingArm this is a low drag, 3D printed cable arm for a BLV mgn cube or any other printer with a free 20mm aluminium extrusion. 

 

It has two channels, one for wires and one for a CPAP hose.

 

The arm has a length of 230mm.

 

BOM:

  • 1x 45mm M5 bolt
  • 1x M5 locknut
  • 2x F9-17M axial bearing
  • 3x velcro straps or zip ties
  • 2x M5 10mm
  • 2x M5 t-nut

Tagi