1 / 1
2.75" Ultralight Swimbait (Fishing Lure) — zdjęcie 1

2.75" Ultralight Swimbait (Fishing Lure)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is a ultralight swimbait that can be printed with FDM and SLA. It was designed and stress tested in fusion 360.

Ocena
0 / 5
Polubienia
71
Pobrania
500
Wydruki
1
Wyświetlenia
2707
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

This is an Ultralight Swimbait that is designed to entice almost any type of fish. The swimbait 2 ¾ "  long and is my best design yet. I have tested the stresses and have found that it can hold about 15lbs (6.8kg) max as long as you print in PETG. I have not tested PLA yet but it should be comparable. All the settings that you will need are within the video. Below the video I also have the settings if you want that as well but the video explains how to set the infill percentage right.

  • Infill (Top Half 5-15%) (Bottom Half 100%) Refer to popper video infill tutorial)
  • Layer Height 0.1
  • Custom Supports

If you have and questions or concerns feel free to ask.

Have fun fishing and as always thank for considering printing and have a good day

Tagi