PROTECTIVE SLEEVE for REMOTE CONTROL of the GOOGLE Chromecast TV 4K

The Design

As I think the remote control for the Google TV Streamer is fragile, I designed this protection sleeve that fits tightly on the remote housing. Leaving the IR eye free, and the mic input too. 

Initial version: 1.01

Material

Filament: TPU shore 95
I highly recommend not to change te materil to be stiffer or harder, as felxibility is needed to be able to slide the casing over it.

Print settings

I applied the following settings for the print:
Layer height: 0.2mm
Infill: 15%, grid
Model orientation: upside down
Perimeters: 2
Support:  on build plate only, type: snug
Model import: -

Note: Please consider other settings incase you think this helps you or the design in any way.

Final thoughts

Please let me know if you print this model and what you think.
Any feedback is always welcome.
Have fun!

Acknowledgements

I began my 3D printing journey in 2023 — A deliberate step into a world that blends creativity with engineering. Drawn to the story and philosophy behind Prusa, I chose to start with one of their printers the MK4. As an engineer, I find this manufacturing method both fun and deeply educational. It challenges to think differently about how you (approach) design and builds: from individual parts to assemblies.

P.S. Also check my other creations:
https://www.printables.com/@iibex_1686865/models