1 / 5
Magical Crystal Butterfly Lantern
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Fully assembled with 3D printed nuts and screws, a cable channel around the back.
- Ocena
- 0 / 5
- Polubienia
- 36
- Pobrania
- 108
- Wydruki
- 0
- Wyświetlenia
- 529
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (11)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (62)Powiązane
Fully assembled with 3D printed nuts and screws, a cable channel around the back. The only glue used is to attach one foot to the base, under where the cable channel for the puck light is.
The crystal itself was printed in a transparent PLA from SunLu, and then airbrushed in order to add the color gradient, the rest was painted in basic Matte Bambu PLA and painted with a metallic spray paint.
Important notes:
- Please make sure that the foot without a screw is placed under the cable channel
- If using the STL files instead of the 3mf profile, add a modifier to the screws and nuts to increase their infill, otherwise they may break
- This was made and tested on a BambuLabs X1C, using a .4mm nozzle. The 3mf file is highly recommended over the STLs, as several modifiers are there to solidify the screw threads, nuts, and make the crystal easier to paint.