Guitar pick/plectrum for CMF Phone 2 Pro
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Just a simple guitar pick to bring with you on the go, always
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 14
- Wydruki
- 0
- Wyświetlenia
- 199
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Music
- Licencja
- Creative Commons — Attribution
Update – June 3, 2025
A new version of the guitar pick has been released, specifically designed to be used in combination with the TPU strap for the CMF Phone 2:
🔗 TPU Strap for CMF Phone 2
This updated design significantly improves shape and usability.
Design Approach
My goal was to avoid creating any bulky attachments, as I personally wouldn’t want to use those. Since I don’t own a CMF Phone 2 for direct testing, I’ve provided three versions of the guitar pick:
Final Version: This is the most reliable design and the one I recommend. It requires an M2.5 screw for proper installation. I printed mine without supports, though supports would have improved the results, and it depends on your printer’s performance with overhangs.
V2: I am uncertain about the printability and fit of this version, especially on lower-end printers like mine.
V1: This version is the most comfortable to use but may not be compatible with the original screw/cap due to the thicker circular area. It was designed to print flat for ease of production. It can be used as-is or separated after printing, though using it attached can feel a bit awkward—it did function in my testing.
Printing Recommendations
Layer Height: A 0.2 mm layer height works well, but I printed mine at 0.14 mm to achieve smoother edges. Given the small size of the part, you may even consider using a finer layer height if you’re aiming for optimal surface quality.
Let me know if you have any feedback or print results—I'm always interested in improving the design based on real-world use!