Jeep Wrangler Tie Downs
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Attach to holes in back. Provides anchor points for rope or bungee cords.
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 19
- Wydruki
- 0
- Wyświetlenia
- 183
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
UPDATE 5/26
I recently upgraded from my 2015 Wrangler (white pictures) to a 2022 Wrangler (red pictures). The new one didn't have the same holes for the bolts. There are 3 threaded holes that take M8x 25 1.25 pitch bolts (I think. It could be 1.0 pitch. I can't remember.) I also had to get washers (see pictures) because the holes in the tie downs were too big in the old tie downs.
To make things easier, I made new versions with "--small hole" at the end of the file name for these smaller screws.
I also made a new length with "medium" in the file name. It is 50mm long. The long one is a little over 100mm long.
*****Print with TPU or flexible filament*****
Two size tie down anchor points. I attached them with ¾" bolts and Nylock nuts (with the nylon ring in one end of the nut). I attached the straps of the cargo net (as seen in the pictures), but I also use them for rope and bungee cords.